Good evening, guests and users of the portal. The sailor editor is with you and today I will tell how to make a hook in minecraft.
How to make a hook in minecraft
This item was added to the game relatively recently. Many of you may have noticed it for the first time in the form of dam traps. But its use is not only in the form of a trap. As far as you know, the hook works as a sensor. Therefore, this sensor can be made instead of redstone. You can give your application. Let's move on to crafting.
After adding this item to the game, many could not find the craft. Someone tried to do it logically, someone wandered around the forums, etc. Soon craft was found, and it turned out to be very simple. We need only three materials. Board, stick and iron ingot. How to get all these items, I think you already know, so let's move on to crafting.
Open the workbench and lay out the craft. We put an iron ingot in the second slot, a stick in the fifth, and a board in the eighth.
If you have any questions, I advise you to visit our forum. There you will find many different topics, on any topic that interests you.
With you was the editor of the Play`N`Trade portal - matros. Until we meet again on our portal, as well as a pleasant game!
In performing various gaming tasks in Minecraft, the gamer will constantly come to the aid of mechanisms crafted by him with his own hand. They will notify about the approach of unwanted "guests" to the player's home or treasury, they will allow you to create various traps for griefers and hostile mobs. And often in such devices a hook will be involved.
You will need
- - Workbench
- - wooden sticks
- - boards
- - threads
- - redstone dust
- - box
- - iron ingots
- - lamp
- - special mods
Instruction
Minecraft players very often give objects their own designations, which only they themselves and knowledgeable people can understand. Some of these names are fixed and become popular. The same thing happened with the tension sensor, which turned into a hook as a result. Nothing can be hung on it, it can also be used as a hook, but it somehow resembles this object when the sensor is bent. This is probably why the fans called this device that way. By the way, the tension sensor can be very useful to you, because with the right use of several sensors, you can arrange a full-fledged security system. So everyone should know how to make a detour in Minecraft.
Hook craft
The Tension Gauge is a toggle switch that was added to the game in one of the latest versions and received overwhelmingly positive feedback as it proved to be incredibly useful. Many began to immediately look for information on how to make a hook in Minecraft, and the recipe was quickly found. In fact, it is extremely simple, so almost everyone in the first stages will be able to make enough hooks for themselves to use them for their own good. So, to create two tension gauges, you need a board, a stick and an iron ingot. The stick must be placed in the central cell of the workbench, the board below it, and the ingot - above it. Why are there two hooks? The thing is that the tension sensor is a paired device, that is, in a single copy it is simply useless. Therefore, when crafting, you will get two samples at once. Now you know how to make a hook in Minecraft, but how to use it?
Installation of sensors
You have already found out that the tension sensor will only function in tandem with the second device, so there should be no misunderstanding. It was quite easy to figure out how to make a hook in Minecraft, since the recipe is simple, and the necessary resources are publicly available. But the installation process can cause difficulties for novice players. So, the first rule is you must install both sensors on the same line. This is done for the reason that between them you will need to pull the thread. When you do this, if both ends of the thread are connected to two different hooks, the device will make a special sound. But at the same time, it is worth remembering that there should be no more than forty blocks between two sensors - if there are more of them, then you will not hear sound, and the device will not work. Therefore, you always need to calculate everything in detail if you play Minecraft. What the hook is for is the next item you need to know. Without this information, your sensors will simply be useless.
Alarm device
Have you figured out in detail how to make a hook? "Minecraft" 1 5 2 in this regard is no different from other versions. You also tried to install it and ensured that the system began to function. But why all this? What will two sensors connected by a thread give you? To find out, try walking between them. The thread will break, and the sensors will instantly start emitting a warning signal. And this can give you a lot, because in fact you get a primitive signaling model. If you want to protect your home and your territory from intruders, surround it with threads connecting sensors that are hidden from prying eyes. When trying to enter your territory, an intruder will break the thread, which will trigger an alarm. So you found out why there is a hook in Minecraft - it helps to keep your buildings and savings intact. But there are some ways to improve the system and raise it to a qualitatively new level.
Defense complex
The alarm is good, but it only notifies you that a stranger has entered your territory. By the time you get back to your home, it may already be too late. Therefore, with the help of tension sensors, it is better to arrange a full-fledged defense complex. To do this, you will need a dispenser, a lot of arrows and red sand. Bring red sand to the hooks, which will be connected to the distributor. Load as many arrows as possible into it, and you can admire your creation. As soon as someone crosses the border of your domain and breaks the thread, the sensors will go off and a flurry of arrows will be fired at him. This works much more efficiently than a conventional alarm.
Progressive Approach
If you play with the Industrial Craft mod, then you will have a great opportunity to make a real energized fence out of your alarm. To do this, it will be enough for you to connect to the sensors and voltage will go through the thread drawn between them. Every mob or intruder that targets your house or your belongings will be reduced to ashes with electricity. This method is the most efficient way to use tension sensors, but is only available if you have the appropriate mod installed.
When you launch Minecraft 1.3 for the first time, you will surely notice new items, one of which is the hook. Of course, you have a question: ““. And I will try to answer this question below.
You all know that red dust circuits have become an integral part of Minecraft, and without them it is impossible to imagine any complex mechanism. The redstone chain activates doors, pistons, lanterns, dispensers, and a bunch of mod-added items. But how do you activate red dust itself? To do this, Minecraft provides buttons, levers, pressure plates and red torches.
The fact is that the hook acts as a red dust activator. With it, you can build tricky traps, as well as new mechanisms. Using a grappling hook in Minecraft is as easy as using a redstone. To build the simplest device, you will need two hooks and some string. The hook, as you probably guessed, is attached to the blocks on the side. The thread can be pulled between two hooks. By doing so, you will get a stretch. 
Run red dust to one of the hooks, and when a player or mob passes through the trip wire, your circuit will activate. If you try to spin this with a piston, it will simply break the thread, however, this can also be used to your advantage.
With a hook in Minecraft, you can make, for example, a security system for your house. Connect the dispenser to such a tripwire, load it with arrows, and you're done. You can pass arrows through fire or lava to make them light up. Well, if you prefer to play with Industrial craft, then you can connect a Tesla coil to such a stretch, then certain death awaits the mobs. Now you know what does a hook do in minecraft. Well, other interesting and original applications, I think you will find yourself.
Today we are waiting for a guide about a not very well-known device in Minecraft - about a hook. There is very little written about this subject on the Internet, since the inhabitants of Minecraft practically do not use it in everyday life.
Why do you need a hook in Minecraft? It is used primarily to create burglar alarms, for example, signal stretching. To construct it, you need to connect the stretch itself to the distributor, and, in turn, put several packs of arrows into it. Also, this system can be improved by adding fire to set fire to arrows. In fact, the hook here plays the role of a redstone activator. As you can see, not quite a standard approach - do not be afraid to experiment, creating new mechanisms.
To make a hook, we need several resources that you can get with little difficulty, namely: 1 iron ingot, 1 plank, 1 stick. By placing all the elements of the recipe, as shown in the figure below, the output will be a Hook:
You can also watch a video about creating a hook:
Remember that the endless world of the Minecraft game embodies so many outlandish possibilities that you just need to apply a little imagination to invent something new and interesting!
Loading...
