To decorate the interior or exterior of your home, it is not at all necessary to purchase various store trinkets. For this purpose, metal crafts made by welding or other methods will do an excellent job. Moreover, this craft is available to everyone, because you just need to follow the instructions, and all the necessary tools can be found at hand.
There are several different manufacturing technologies, and you can choose any of them, starting from personal preferences, knowledge and capabilities. Everything that can be made of metal is always closely related to the method of manufacture.
As known, with the help of metal and with little effort, almost any design can be made attractive and practical. This includes various benches, cornices, furniture and other interior items.
Since iron crafts are handmade, their cost in stores is quite high, so it will be much easier to master this craft on your own and save your money. The only thing you have to spend is materials for making.
The first step is to choose the direction you like to work in. Particularly often needed are instruments for bending and forging, stamping, cutting, and chasing. After that, a drawing of the future crafts and the necessary materials are prepared.
There is a whole list of different methods that you can use to make handmade metal work for sale or for personal use.
As for the design drawing, it can be made manually on paper or with the help of specialized computer programs, which can be found in a wide range all over the Internet.
In principle, you can do without a diagram when it comes to simple products. But for large items such as gates, gratings and the like, a drawing is essential.
simple products
If you have never been involved in such a craft, then it is best to start by making simpler iron products. You do not need to have special skills and experience in this field. Just follow the instructions described, and everything will work out.
Tin box
This craft is not only beautiful room decor, but also a useful thing. Therefore, you can start with it. Prepare all tools:
First you need to clean the jar of paint. For this need sandpaper. It is best to perform this step when the tin is not open yet, otherwise there is a high probability of accidental material deformation, which is highly undesirable.
Then you need to cut the jar as follows: remove the bottom, and cut the top lengthwise. Using sandpaper, sharpen all the bumps and sharp cuts. This will help to give the product a neater look, as well as avoid cuts.
Now you need to apply a pattern. Here - complete freedom of choice. You can use any accessories and paint the picture you like.
After that, it remains only to assemble a fake according to the drawing and find a suitable place for it.
metal owl
If you have experience with a welding machine, then after making the box, you can take on a more complex design - a metal owl. To do this, you will need the following tools:
First you need to make a sketch of an owl with a pencil on paper, how the future craft will look like. Therefore, make every effort to create a beautiful picture. Then you need to transfer the drawing to cardboard.
Now you need a grinder and thin metal. For an owl, you need to have materials for the eyes, body with feathers, wings and tail. This is all cut out of iron parts using a grinder:
- When creating the eyes, try to make holes in them into which the bolts will be inserted.
- Make notches around the perimeter of the body that will create the effect of an owl's plumage. For this, a chisel is needed.
- A piece of bent metal can serve as a beak.
- When creating paws, use various rods, connecting them by welding.
After making all the parts of the owl separately, combine them with a welding machine. In general, at this stage, the product is already ready, it remains only to apply color and treat the owl with a special varnish. You can add your items.
cold forging
If you have a press, you can do cold forging. With its help, you can create more interesting and attractive designs for decor. This method is simple, but it requires special tools that not every craftsman can find:
- Gnutik for making bends.
- Snail for deformation of a sheet of iron.
- Flashlight for weaving.
- Wave for making wavy patterns.
- Twister for twisting rods together. This will create spiral elements.
As in other cases, the first step is to prepare a sketch or diagram. After that, the stage of manufacturing the elements of the overall structure separately begins. As with the owl, welding will be required to finally bring all the pieces together.
Now all seams are removed, the entire structure is polished with sandpaper, and a special varnish is applied at the end. The structure is ready.
As you can see, in order to decorate your house or cottage, it is not at all necessary to buy expensive decor elements, just a little effort is enough to invent your crafts. Of course, if you do not have at least minimal skills in making such structures, everything will not be so simple. But starting with simple options, you can gradually reach serious heights in this craft.
The first products metal crafts were made in antiquity by skilled craftsmen. Gradually, artistic forging turned into a real work of art and, starting from the 11th century, became an integral part of the architectural structures of Europe. Today, metal products have a high cost, but at the same time they can emphasize the exclusivity of the exterior or interior of an apartment or a country house. We offer you several master classes that will help you make metal crafts with your own hands.
metal owl
Materials:
- paper;
- pencil;
- sheets of cardboard;
- scissors;
- sheet metal 1.5 mm thick;
- Bulgarian;
- chisel;
- hammer;
- welding machine;
- chemical rust remover;
- 2 washers and 2 bolts under them;
- rod 6-8 mm.
Let's start making metal crafts - owls
1) With a pencil on a piece of paper, draw an owl.
2) We visually break the owl into separate elements and transfer them to the sheets of cardboard in full size of the owl. Cut out templates with scissors.
3) Now we apply the cardboard templates to the sheet metal, transfer them and carefully cut out each detail of the owl with a grinder.
4) In the detail, which is the eyes of an owl, we make holes for the bolts. We make them with a chisel and a hammer.
5) Now we make feathers on all the details of the owl. To do this, take a chisel and make notches.
6) Paws are easy to make from a rod. We cut off the pieces needed for the paws from the rod and weld them together so that we get a paw. We do the second one in the same way.
7) From a piece of sheet metal we make a beak.
9) Now you can connect the parts into one. To do this, carefully weld each of them to each other in the desired sequence from the back of the owl. Then we weld the beak and paws to the finished owl.
10) Now, with the help of a chemical solvent, we clean the owl from rust. Follow the instructions on the solvent. If a suitable solvent is not available, make a homemade solution of baking soda and water. It should be of such density that it is easily smeared over the surface. Clean the owl with an old toothbrush, and then rinse well. All work with the solvent is recommended to be done with gloves.
11) When the cleaning process is completed, cover the entire owl with a special varnish. It can be purchased in a special store.
Craft owl made of metal ready. It will become creative, made with love and skill, and will keep memories of the master forever.
Metal figurines look original in a flower bed or in a garden at their summer cottage, so with the help of our step-by-step instructions, you can easily make a rat or some other animal out of metal.
Material:
- Bulgarian;
- drill with a drill for metal;
- metal scissors;
- electric welding;
- circle for stripping on the grinder;
- rods with a diameter of 4,6,10,12 and 14 mm;
- sheet of 2 mm metal;
- wire;
- metal ball from the bearing 3 pieces.
1) We take two pieces of a metal pipe (this rat has a height of 50 centimeters). From one of them we make a head: we cut out the same segments over the entire diameter and get a blank, as in the photo. Then we weld and, using a grinder with a cleaning wheel, we clean this part. We make the body and also clean it in a similar way. Consider the proportions: the head is larger than the body. We weld the head to the body.
2) On a sheet of 2 mm metal we transfer the sketches of the ears and paws of the rat and cut it out. We turn blanks for paws into a funnel. We weld them and clean the seams. Then, by electric welding, we weld each paw to the body and clean the seams again. We weld the ears to the head and do not forget to clean the seams too.
3) Now we make rat paws from twigs. For the upper paws, a 4 mm rod is welded to 10 mm, and for the lower 6 mm paws, it is welded to 12 mm. We insert into the holes of the funnels and scald with welding.
4) We make the tail from a rod of 14 millimeters and weld it to the body.
5) Let's move on to the muzzle of the rat. First, we will make two holes in the head for the eyes. They should be smaller than ball bearings. Now we will drown these balls in the holes and weld them neatly and thinly. We weld the remaining ball in place of the nose by electric welding. Drill holes for the mustache from the wire and insert it.
7) Then we make longitudinal welding seams close to each other throughout the rat. Thanks to this, an imitation of wool will be obtained. Now again we clean the entire craft with the help of a grinder with the desired disk. This is necessary in order to rid the product of scale, slag and give shine.
8) At the end of the work, we apply a special varnish on a metal rat, which can be colorless, or with some effect. It's up to you. The rat in the photo is covered with a colorless varnish with a satin effect.
Now it remains to figure out where to put it or to whom to present such a wonderful gift,.
the Rose- this is a unique flower, the beauty of which I would like to preserve as long as possible. Metal rose will delight you for many years and decorate the classic interior of the bedroom.
Materials and tools:
- yews;
- sheet metal 0.5 mm;
- metal scissors;
- steel wire 6 mm;
- grindstone;
- pliers;
- hammer;
- Bulgarian;
- paint for metal;
- welding machine.
Master class metal rose
1) During work, observe safety precautions, use gloves and a mask for welding.
2) We cut out petals for a bud and a couple of leaves for a rose from sheet metal with special scissors. We cut out the petals in the following sequence: from smallest to largest, starting with 15 mm and ending with 80 mm. You need to cut about thirty petals, then the bud will be dense and stuffed.
3) Then we smooth the edges of each petal using a grindstone.
4) Cut out triangles from the remaining scraps of sheet metal - they will become rose thorns. Their size should not be less than 10 mm.
5) We make a stem blank from steel wire. Our task is to get rid of its even state. To do this, we can use a hammer to bend it a little so that it looks like a real rose stem.
6) Create a button. The first two smallest petals need to be clamped in a yew and bent in half. Next, we begin to form eight petals in an arc relative to the center of the bud, but be sure to grab each part by welding and then clean it.
7) All subsequent petals are also formed in an arc, but bending back the top of the petal. This procedure is done with a hammer. And just like the previous petals, we weld and clean it again.
8) Now we weld spikes to the already prepared stem. Then we clean them with a grinder.
9) Rose leaves. It is necessary to clamp and unclench the sheet in a yew to get a vein. Then we bend the edges with pliers. And now we attach the leaves to the stem by welding and clean the seams.
10) We weld a rosebud to its stem, carefully clean it at the junction and cover the entire rose with metal paint.
A beautiful flower that combines the tenderness of beauty and the rigidity of the metal is ready. An original and such a painstaking gift will delight the female gaze for many years.
Metal crafts: Panel - fish
panel- This is a decorative composition that serves for beauty and comfort in the house. It can be a carved or ceramic composition, bas-relief or stucco. In the architecture of buildings, panels of tiles of different colors or murals are often found. We offer to make crafts from metal: do-it-yourself wall panel from a metal frame.
materials
- thick wire;
- thin wire;
- beads, a lot of beads;
- a dozen beads;
- paper;
- simple pencil;
- scissors that can cut wire.
1) The very first thing to do is to draw a sketch of a fish that will occupy a central place in the panel.
2) According to the sketch, we begin to make a fish frame from thick wire. At the same time, we make roundings, as in the photo. In point 5 you will understand what they are for.
3) From the same wire we make jumpers that will increase the rigidity of the structure.
4) A thin wire is needed to fix the frame.
5) Now we begin to fill the fish with beads and beads. To do this, we attach a thin wire to the roundings on the frame and begin to string beads on it. So we braid all parts of the fish with beads, while fastening the wire with beads. To make the product look aesthetically pleasing, do it on the back of the fish. Beads will help emphasize the large scales of the fish, and one bead will go to making the eye. The color of the future craft depends on the selected beads, so fantasize, do not be afraid.
The finished fish can be hung on the wall in the nursery or hallway. It will become not only an interior decoration, but also a pleasant gift for a fishing lover. We recommend making several fish so that you can create a whole one on the wall.
metal crafts parents can do it with the whole family, as you need to follow safety precautions when working with a welding machine. If you do not have special skills in working with metal, you can make crafts from wire or a tin can, which will also look exclusive. This concludes our article on do-it-yourself metal crafts, see more crafts on the site.
Surely in every cottage you can find metal waste. It could be like small screws, nuts, and larger products. For example, pipe cuttings, remnants of metal sheets, etc. However, metal waste can be useful not only as a recyclable material. You can make a variety of things out of them that will decorate your garden. Various beautiful products can be made from ordinary wire and pieces of metal.
Many summer residents decorate their plots with expensive metal crafts purchased in stores. Manufacturers justify the high cost of crafts by the fact that they are usually created by hand. However, if the craftsmen of manufacturing companies can create beautiful metal products with their own hands, then why not do it ourselves? To create things like this no complex fixtures required. Everything you need can be easily found at the cottage.
Safety
First of all, you should think about safety. Of course, when working with the simplest materials, without using welding, it is almost impossible to get a severe injury. However, when making tin can crafts, you could be seriously injured.
If you work with ordinary wire and nuts, it will be enough to put on goggles and hard gloves on your hands. When working with a welding machine, the equipment should be more serious. In addition to gloves, a mask and visor, as well as a protective suit, should be worn. The room must be regularly ventilated. When working with wood (if there are sources of ignition nearby), you should always be able to put out the fire.
metal crafts
For the first do-it-yourself metal crafts, you will not need any complex tools or fixtures. A simple aluminum can is enough. You can make a small box out of it. In addition to the bank, you will need:
- sandpaper;
- scissors;
- ball pen;
- gloves.
It is advisable to take the whole jar, not open. The surface of another whole can needs to be cleaned of paint with sandpaper, while trying to do everything carefully so as not to accidentally bend it. Next, you need to cut the jar so that you get a rectangular blank. To do this, the bottom of the can is cut out, and the upper part is cut along. All roughness and sharp corners must be removed (with sandpaper).
Then you can start creating a pattern of drawings on the product. Using an ordinary pen on a jar, you can easily squeeze out patterns, since aluminum is a soft metal. Then it remains only to form a jar so that it takes the form of a box.
More complex products
Scrap metal crafts can be much more complex and interesting than a simple tin can. You can make practical products. It is easy to make a brazier from an empty metal barrel. In addition to the barrel, you will need:
- iron bars or pipe trimmings for legs;
- welding machine;
- Bulgarian;
- for safety - protective accessories.
The barrel must be cut along. Legs are welded to the bottom, the top will be a lid.
Naturally, a barrel of chemicals, paint or other similar non-food substances for the manufacture of barbecue is not suitable. It is optimal to use a container from under the water.
Complex products
There are many interesting techniques with which you can create beautiful iron crafts.
- Filigree. This technique allows you to make beautiful patterns from wire by soldering.
- Chasing. The technique is quite often used for the manufacture of crafts. The technique is a change in the shape of the product using a hammer.
- Casting. The form is filled with molten iron (or alloy), giving the product the same appearance as the form. This method of making crafts is similar to the factory one.
At first, complex crafts will not work. Yes, and simple products, frankly, will be unimportant. But gradually the skill is being developed, and it will not be difficult to make a complex craft. Ideas can be taken from special magazines and books. But it would be much better to make products according to your own drawings. By constantly improving the technique, you will be able to create real masterpieces from metal.
You can decorate the interior of a house or a country cottage not only with store-bought trinkets, but also with hand-made metal products. Moreover, it is available to everyone, since it requires a minimum set of tools and knowledge. At the same time, such things can make decorate any interior.
Thinking about creating such items, everyone can choose for themselves manufacturing technology based on your experience and knowledge. Although in each case the selected technique will require certain costs necessary for the purchase or manufacture of special equipment.
It is in the power of everyone to create a lot of various metal products, to arrange a garden with their help. It can be both crafts and pieces of furniture, as well as various decorative bridges and forging elements.
The technology of making things from metal
Do-it-yourself metal products can make any design more attractive, including benches, cornices, furniture and other things. Moreover, the owner can choose the style of his choice, paying attention to the fact that the created thing looks harmonious in a particular room.
In stores, metal products are offered at rather high prices due to the fact that they are made by hand. However, if you wish, you can master the science of creating these items yourself, thanks to which you can save a lot of money on this. The only costs that may arise here will be related to the purchase of materials.
To create metal patterns and details, you can choose any technique you like. Quite common among them are forging, stamping, cutting, bending, chasing and filigree. After the scheme or drawing of the product is received, as well as the necessary materials are prepared, the person will be ready to implement the plan to create an unusual and beautiful product.
Metal is the material on the basis of which you can create a whole composition of various crafts for the garden.
Therefore, there are many different methods that allow you to create at home pretty original stuff.
- Casting. The essence of this technique is to fill with a liquid alloy of a special form.
- Forging. This method is based on the impact on the workpiece with a hammer, temperature, press and other methods of deformation.
- bending. This technique is in many ways similar to forging, it is based on riveting and welding of product elements.
- Difovka. This method is characterized by the use of a hammer, with the help of which thin sheets of iron are given the necessary shapes.
- Stamping and cutting. Using this technique, you can effortlessly change the shape of the workpiece, as well as create holes.
- Filigree. This method involves the use of cast or smooth wire as raw material, from which the product is created by soldering the bent elements of the pattern.
- Chasing. This processing method is simple in execution, and its essence lies in placing a special tool on the workpiece, which is acted upon by a hammer, thereby changing the shape of the product.
There are several ways to make drawing for a metal product. It can be developed manually or use special computer programs. Thanks to the drawing, you can find out in advance how much material is needed to create things. First of all, those who plan to make large objects, for example, gates, bars, cannot do without it. Having a ready-made sketch in hand, it will be easier for the master to understand even before starting work how harmoniously this product will look in the place chosen for its placement.
simple metal things
If you do not have experience in making such things with your own hands, then it is recommended that you start by creating the simplest metal objects. Such can be a metal box, which can act not only as a decorative element, but also perform practical functions.
Required Tools
Suitable as a base regular tin can. To make such a box, you will need to prepare a number of tools:
The process of making a box with your own hands begins with cleaning the surface of the can from paint, for which use sandpaper. It is advisable to carry out the operation when the jar is still full. Otherwise, you will have to perform such preparation as carefully as possible, because if the metal is deformed, then you are unlikely to be able to make a beautiful box.
After that, they begin to cut the can: this must be done in such a way that a rectangular blank is obtained. Before that, you need to cut off the bottom, after which the upper part is cut along. During this operation, irregularities will necessarily appear along the edges, which it is desirable to sharpen immediately.
Next, it must be placed on a hard surface, where the images contained in the drawing are already applied with a pencil. After that, proceed directly to the creation of the pattern. You will not have any restrictions in choosing jewelry for the box, but it is still advisable to use symmetrical details. To create a pattern ballpoint pen required, with which you can easily push through aluminum. You can achieve the effect of a pronounced texture if you draw along the contour lines of the pattern more than once. After completing the steps listed above, you will only need to assemble the box.
If you have welding equipment and skills in handling it, you can make a very beautiful metal owl with your own hands. In addition, you will have to prepare the following tools:
At the first stage it is necessary draw a sketch of an owl on paper, after which it is transferred to cardboard. So you make it easier for yourself to cut out individual elements. To create an owl, we will have to make eyes, a body that includes feathers, wings and a tail. To make it easier for you to cut metal parts, you can use a grinder.
When creating the eyes for the owl, make sure that they have large holes in them, through which you can insert bolts. On all the scales you will have to create notches, thanks to which the plumage effect will be provided. To do this, you will have to use a chisel. Paws can be made by connecting parts of the rod to each other, using welding for this. To create a beak, use a piece of bent metal. During the assembly of the product, the beak and paws must be welded at the very end. When all the elements are in place, the owl can be further decorated by treating it with a special varnish.
How to make frost patterns?
Making frosty patterns is not a very time-consuming procedure, but at the same time it is able to provide a rather spectacular look to the product, giving it a resemblance to old craftsmen's products. This largely contributes manifestation of the structure of tin that looks like crystals. To make frosty patterns, it is recommended to use tin cans, since a layer of tin has already been applied to their surface.
You can develop the pattern as follows: for this you need a candle, over which you need to hold individual parts of the metal for some time. The jar must be heated for a strictly defined time. If it is overexposed, it will lead to damage to the product. The main goal that must be achieved during the heating of the tin layer is to allow it to manifest itself.
You can also make a frosty metal pattern with your own hands if you place the tin on the surface of the steel plate in advance, and then heat or melt.
A burner is suitable for this purpose: thanks to a steady flame, you can easily heat the required area of \u200b\u200bthe tin. As the tin heats up, you can notice how a shine appears on it, which disappears after a few seconds. Try to process the metal sheet in such a way that its sections are heated unevenly, otherwise you will end up with a uniform pattern. To give the workpiece an original look, creating a unique pattern, it is enough to warm the sheet in the corners.
When the desired pattern is obtained, it is necessary to sharply lower the temperature of the metal sheet. To do this, it is dipped in cold water or sprinkled. To make the created pattern visible on the sheet as clearly as possible, the surface can be further treated with hydrochloric acid. For safety, you need to prepare a tool - stick to which a cotton swab is tied.
Sometimes, after warming up, it is not possible to achieve the required clearance. In this case, you can remove it once with sandpaper. It is not recommended to repeat this technique, because otherwise it will lead to the complete removal of the tin layer.
For decoration purposes, you can also turn to wax paint, which is used to process certain sections of a metal sheet, after which they are heated. It is possible to ensure the stability of the pattern created on the jar by treating it with a special varnish. Even better, if you apply a colored clear varnish on it, thanks to which your thing will look even more original.
How is cold forging done?
The cold forging method can also be used to create metal products at home. With the help of this technique, you can make things with an unusual shape with your own hands, this is done with the help of a press. With a small thickness of metal there is no need to resort to heating it, this will help to avoid many difficulties.
Cold forging tools
Although this manufacturing method is more simple, in contrast to the technique of creating metal products by hot forging, certain tools are also needed here:
- Gnutik, with which the workpiece will be bent to give the desired shape;
- A snail, which is also used to deform a sheet of metal;
- Special flashlight used for weaving;
- A wave that allows you to make wavy patterns;
- A twister that allows you to twist the rods together, thereby making it possible to obtain spiral elements.
Manufacturing steps
Even before the manufacture of a metal product by forging, it does not hurt to depict sketch or product diagram.
Then, using the available tools, they begin to manufacture the constituent elements of the product, and subsequently they are connected to each other by welding.
The last step in the manufacture of metal products by cold forging is the removal of seams, grinding and applying special varnishes.
The most common options for cold forging were discussed above, but it can also be performed in a slightly different way - in the form of embossing. To use this method, there is no need to purchase special complex tools. This technique is based on working with a workpiece, on which a pre-composed pattern is applied by extruding metal. After a sketch of a pattern or image has been prepared, it must be cut out. Then you need to take care of the availability of space for bending the material.
After that, the board is covered with a layer of resin, where the finished workpiece is already laid out. From this moment, the process of its design begins by transferring the pattern to it.
Conclusion
You can decorate your home not only with the help of modern accessories and beautiful little things that are offered in stores. If you wish, you can independently make metal things that will look no worse. Naturally, in the absence of skills in the manufacture of such products, it is possible that the first box or other thing that will be made by your own hands will not be as beautiful as you would like.
However, as you hone your skills, you will get better at this task, and subsequently it will not be difficult for you. create more complex things. This will allow you to turn your hobby into a fairly profitable business. After all, things that were made by hand are very much appreciated.
We invite you to look at interesting, non-standard and original metal products.
Some METAL ARTWORK functional, and some are just fun.
original metal product- scissors 5 in 1. Now you can work 5 times less.
Useful metal product- case for knives. Takes up little space and is safe.
Want to become a knight in the kitchen? Cooking is like fighting. This is probably what designer James Brown thought when he created this original metal frying pan with a handle in the form of a sword handle.
If you are an auto mechanic at heart and miss work or you have some spare parts left after an engine overhaul, then this metal table You just need.
Battery-boiler from metal- a great solution for those who love warm and hot coffee.
Aluminum chest of drawers from the Black Hawk collection was named after the legendary Sikorsky UH-60 Black Hawk helicopter, which has been in service since 1976. During this time the design metal chest of drawers became a landmark not only for the helicopter industry. The rounded corners and shape of the handles follow the lines and details of the famous helicopter. In addition, to enhance the impression, the models are available in the Black Spitfire variant - this is a black aluminum coating with a riveted fastening system, it repeats the surface design of the famous English fighter Supermarine Spitfire.
Continuing the theme, but from a different collection aluminum table. Design metal tables made in such a way that if you are going on the road, then you already have all the necessary hand luggage.
dangerous razor out Damascus become can make shaving not only easy, but also beautiful.
Tactical metal credit card- "credit card" because the size of the tool corresponds to the size of a credit card and will easily fit in your wallet, "tactical" because it is metal product includes a dozen tools: a knife, a can opener, a screwdriver, a chisel, a saw, a can opener, a bottle opener, a ruler, wrenches of various sizes, a device for orienting the terrain, a hole for a lanyard.
Business card-razor or razor-business card can probably be called either way, and so, while the interesting design of this metal products can be almost anything.
And how do you like such a folding metal business card knife? A very convenient tool to successfully conduct business negotiations, and there is even pink for glamorous blondes.
Practical metal product - device for beating meat. Always useful in the kitchen and in life.
metal product in the style of the Middle Ages - you can feel like a knight and no less.
With such metallic Hook Captain is not only safe, but also useful.
metal product for football fans - one bottle is always not enough, but six is the most.
Just the essentials metal product You can take a break from cycling and relax.
romantic metal product- with such a candle, your pleasant evening will last for a very long time.
Modern metal fireplace - a good way to warm up around the fire in the truest sense.
metal product in a relic style - you can dry things, or you can study anatomy.
Designer sculpture from metal - nothing superfluous ... I didn’t have to throw it away, everything came in handy, and the old wheels, and gears, and shock absorbers, and disks from the car, etc.
With such a metal product It will be not only beautiful, but also light.
funny metal figurines animals - do not bark, do not bite, and are not allowed into the house.
The young sculptor Michael Alison, who works in the design of interiors and light sources, embodied a poetic epithet in his unusual works of glass and metal . Chandeliers, sconces, table lamps and floor lamps - everything is subject to the original idea of combining rough plumbing fittings and openwork light guides, “blown out” by the author himself, literally, in one breath. Real Water Punk!
Do you want to have an exclusive call in the apartment? There is nothing easier. Gather every metal junk, the remains of a chandelier, a shower, Turks for coffee, a typewriter, a clock and copper pipes, and arrange it as you wish.
Unusual metal product- industrial style hookah, smoke to your health, but the Ministry of Health still warns ...
wall metal watch This watch will definitely last forever.
metal chess set Weighing up the Competition 2012. Brass, teak, felt. Intellectual fun for trade workers.
Metal constructions in industrial style always look not only original, but also bring tangible benefits.
very famous metal product- multifunctional knife - will help in the campaign, needed at home, help out ... during the economic crisis.
This penknife from the Swiss company Wenger includes 85 tools. Its length is 23 cm, weight is almost a kilogram.
Door handle pistols. The design of the door handles bang-bang (can be translated as "bang-bang") accurately imitates the Makarov pistol. An elegant replica of the real weapon is available in several colors - from pearl white to gold, which will allow metal object organically fit into a wide range of interiors.
Original suitcase-canister GasCase. The 20 l fuel canister is inscribed in the shape of a parallelepiped for ease of transportation without the risk of damage. The most important and important advantage of GasCase is the safety of even fragile things during transportation, because a suitcase made of metal- thin but strong steel.
Safe metal product- furniture from deep-sea mines. As it turned out, a wide range of furniture, accessories and interior elements can be made from mines: tables, armchairs, fireplaces, a toilet, and even a pram in the style of the Adams family. Looks very interesting, although not everyone metal object can be seen in the interior. But such furniture is strong, reliable and durable! What is called, forever!
If, after disassembling the engine, you are going to throw away the used piston, then it’s worth considering, what if you can do something similar, for example, metal lamp or an unusual stand.
If you have similar and interesting images or photos related to interesting metal product design, then you can send them to us by mail This e-mail address is being protected from spambots. You need JavaScript enabled to view it with comments and explanations, and we will definitely post them on our website.
And besides, if you want to have an original non-standard ART PRODUCT FROM METAL made to order and individually for you, then we will be happy to make it according to your instructions.
Loading...
