Fish fins can be paired or unpaired. The paired ones include the thoracic P (pinna pectoralis) and the abdominal V (pinna ventralis); to the unpaired ones - dorsal D (pinna dorsalis), anal A (pinna analis) and caudal C (pinna caudalis). The exoskeleton of the fins of bony fishes consists of rays that can be branchy And unbranched. The upper part of the branched rays is divided into separate rays and has the appearance of a brush (branched). They are soft and located closer to the caudal end of the fin. Unbranched rays lie closer to the anterior edge of the fin and can be divided into two groups: articulated and non-articulated (spiny). Articulated the rays are divided along their length into separate segments; they are soft and can bend. Unarticulated– hard, with a sharp apex, tough, can be smooth or jagged (Fig. 10).
Figure 10 – Fin rays:
1 – unbranched, segmented; 2 – branched; 3 – prickly smooth; 4 – prickly jagged.
The number of branched and unbranched rays in the fins, especially in unpaired ones, is an important systematic feature. The rays are calculated and their number is recorded. Non-segmented (spiny) ones are designated by Roman numerals, branched ones - by Arabic numerals. Based on the calculation of the rays, a fin formula is compiled. So, pike perch has two dorsal fins. The first of them has 13-15 spiny rays (in different individuals), the second has 1-3 spines and 19-23 branched rays. The formula for the dorsal fin of pike perch is as follows: D XIII-XV, I-III 19-23. In the anal fin of pike perch, the number of spiny rays is I-III, branched 11-14. The formula for the anal fin of pike perch looks like this: A II-III 11-14.
Paired fins. All real fish have these fins. Their absence, for example, in moray eels (Muraenidae) is a secondary phenomenon, the result of late loss. Cyclostomes (Cyclostomata) do not have paired fins. This is a primary phenomenon.
The pectoral fins are located behind the gill slits of fish. In sharks and sturgeon, the pectoral fins are located in a horizontal plane and are inactive. These fish have a convex dorsal surface and a flattened ventral side of the body that gives them a resemblance to the profile of an airplane wing and creates lift when moving. Such an asymmetry of the body causes the appearance of a torque that tends to turn the fish’s head down. The pectoral fins and rostrum of sharks and sturgeons functionally constitute a single system: directed at a small (8-10°) angle to the movement, they create additional lifting force and neutralize the effect of rotational moment (Fig. 11). If a shark's pectoral fins are removed, it will raise its head upward to keep its body horizontal. In sturgeon fish, the removal of pectoral fins is not compensated for in any way due to poor flexibility of the body in the vertical direction, which is hampered by bugs, therefore, when the pectoral fins are amputated, the fish sinks to the bottom and cannot rise. Since the pectoral fins and rostrum in sharks and sturgeons are functionally connected, the strong development of the rostrum is usually accompanied by a decrease in the size of the pectoral fins and their removal from the anterior part of the body. This is clearly noticeable in the hammerhead shark (Sphyrna) and sawnose shark (Pristiophorus), whose rostrum is highly developed and the pectoral fins are small, while in the sea fox shark (Alopiias) and the blue shark (Prionace), the pectoral fins are well developed and the rostrum is small.
Figure 11 – Diagram of vertical forces arising during the forward movement of a shark or sturgeon in the direction of the longitudinal axis of the body:
1 - center of gravity; 2 – center of dynamic pressure; 3 – force of residual mass; V0– lift force created by the body; Vр– lifting force created by the pectoral fins; Vr– lifting force created by the rostrum; Vv– lifting force created by the pelvic fins; Vс– lift force created by the caudal fin; Curved arrows show the effect of torque.
The pectoral fins of bony fish, unlike the fins of sharks and sturgeons, are located vertically and can perform rowing movements back and forth. The main function of the pectoral fins of bony fishes is low-speed propulsion, allowing precise maneuvering when searching for food. The pectoral fins, together with the pelvic and caudal fins, allow the fish to maintain balance when motionless. The pectoral fins of stingrays, which evenly border their body, serve as the main propellers when swimming.
The pectoral fins of fish are very diverse in both shape and size (Fig. 12). In flying fish, the length of the rays can be up to 81% of the body length, which allows
Figure 12 – Shapes of pectoral fins of fish:
1 - flying fish; 2 – slider perch; 3 – keel belly; 4 – body; 5 – sea rooster; 6 - angler.
fish soar in the air. In freshwater fish, keelbellies from the Characin family, enlarged pectoral fins allow the fish to fly, reminiscent of the flight of birds. In gurnards (Trigla), the first three rays of the pectoral fins have turned into finger-like outgrowths, relying on which the fish can move along the bottom. Representatives of the order Anglerfish (Lophiiformes) have pectoral fins with fleshy bases that are also adapted to move along the ground and quickly bury themselves in it. Moving along hard substrates with the help of pectoral fins made these fins very mobile. When moving along the ground, anglerfish can rely on both pectoral and ventral fins. In catfish of the genus Clarias and blennies of the genus Blennius, the pectoral fins serve as additional supports during serpentine movements of the body while moving along the bottom. The pectoral fins of jumpers (Periophthalmidae) are arranged in a unique way. Their bases are equipped with special muscles that allow the fin to move forward and backward, and have a bend reminiscent of the elbow joint; The fin itself is located at an angle to the base. Living on coastal shallows, jumpers with the help of pectoral fins are able not only to move on land, but also to climb up plant stems, using the caudal fin with which they clasp the stem. With the help of pectoral fins, slider fish (Anabas) also move on land. Pushing off with their tail and clinging to plant stems with their pectoral fins and gill cover spines, these fish are able to travel from body of water to body of water, crawling hundreds of meters. In such bottom-dwelling fish as rock perches (Serranidae), sticklebacks (Gasterosteidae), and wrasse (Labridae), the pectoral fins are usually wide, rounded, and fan-shaped. When they work, undulation waves move vertically downward, the fish appears to be suspended in the water column and can rise upward like a helicopter. Fishes of the order Pufferfish (Tetraodontiformes), pipefish (Syngnathidae) and pipits (Hyppocampus), which have small gill slits (the gill cover is hidden under the skin), can make circular movements with their pectoral fins, creating an outflow of water from the gills. When the pectoral fins are amputated, these fish suffocate.
The pelvic fins perform mainly the function of balance and therefore, as a rule, are located near the center of gravity of the fish's body. Their position changes with the change in the center of gravity (Fig. 13). In low-organized fish (herring-like, carp-like) the pelvic fins are located on the belly behind the pectoral fins, occupying abdominal position. The center of gravity of these fish is on the belly, which is due to the non-compact position of the internal organs occupying a large cavity. In highly organized fish, the pelvic fins are located in the front of the body. This position of the pelvic fins is called thoracic and is characteristic primarily of most perciform fish.
The pelvic fins can be located in front of the pectoral fins - on the throat. This arrangement is called jugular, and it is typical for large-headed fish with a compact arrangement of internal organs. The jugular position of the pelvic fins is characteristic of all fish of the order Codfish, as well as large-headed fish of the order Perciformes: stargazers (Uranoscopidae), nototheniids (Nototheniidae), blennies (Blenniidae), etc. Pelvic fins are absent in fish with eel-shaped and ribbon-shaped bodies. In erroneous (Ophidioidei) fish, which have a ribbon-eel-shaped body, the pelvic fins are located on the chin and serve as organs of touch.
Figure 13 – Position of the ventral fins:
1 – abdominal; 2 – thoracic; 3 – jugular.
The pelvic fins can be modified. With their help, some fish attach to the ground (Fig. 14), forming either a suction funnel (gobies) or a suction disk (lumpfish, slugs). The ventral fins of sticklebacks, modified into spines, have a protective function, and in triggerfishes, the pelvic fins have the appearance of a spiny spine and, together with the spiny ray of the dorsal fin, are a protective organ. In male cartilaginous fish, the last rays of the ventral fins are transformed into pterygopodia - copulatory organs. In sharks and sturgeons, the pelvic fins, like the pectoral fins, serve as load-bearing planes, but their role is less than that of the pectoral fins, since they serve to increase lifting force.
Figure 14 - Modification of the pelvic fins:
1 – suction funnel in gobies; 2 - suction disk of a slug.
Cartilaginous fish.
Paired fins: The shoulder girdle looks like a cartilaginous semi-ring lying in the muscles of the body walls behind the gill region. On its lateral surface there are articular processes on each side. The part of the girdle lying dorsal to this process is called the scapular section, and the part ventral is called the coracoid section. At the base of the skeleton of the free limb (pectoral fin) there are three flattened basal cartilages, attached to the articular process of the shoulder girdle. Distal to the basal cartilages are three rows of rod-shaped radial cartilages. The rest of the free fin - its skin blade - is supported by numerous thin elastin threads.
The pelvic girdle is represented by a transversely elongated cartilaginous plate lying in the thickness of the abdominal muscles in front of the cloacal fissure. The skeleton of the ventral fins is attached to its ends. The pelvic fins have only one basal element. It is greatly elongated and one row of radial cartilages is attached to it. The rest of the free fin is supported by elastin threads. In males, the elongated basal element continues beyond the fin blade as the skeletal basis of the copulatory outgrowth.
Unpaired fins: Typically represented by a caudal, anal, and two dorsal fins. The tail fin of sharks is heterocercal, i.e. its upper lobe is significantly longer than the lower one. The axial skeleton, the spine, enters it. The skeletal base of the caudal fin is formed by elongated upper and lower vertebral arches and a number of radial cartilages attached to the upper arches of the caudal vertebrae. Most of the tail blade is supported by elastin threads. At the base of the skeleton of the dorsal and anal fins lie radial cartilages, which are embedded in the thickness of the muscles. The free blade of the fin is supported by elastin threads.
Bony fish.
Paired fins. Represented by pectoral and ventral fins. The shoulder girdle serves as support for the pectorals. The pectoral fin at its base has one row of small bones - radials, extending from the scapula (which makes up the shoulder girdle). The skeleton of the entire free fin blade consists of segmented skin rays. The difference from cartilaginous ones is the reduction of basalia. The mobility of the fins is increased, since the muscles are attached to the expanded bases of the skin rays, which movably articulate with the radials. The pelvic girdle is represented by paired flat triangular bones closely interlocking with each other, lying in the thickness of the muscles and not connected with the axial skeleton. Most teleost pelvic fins lack basalia in the skeleton and have reduced radials - the blade is supported only by cutaneous rays, the expanded bases of which are directly attached to the pelvic girdle.
Unpaired limbs.
Paired limbs. Review of the structure of paired fins in modern fish.
They are represented by dorsal, anal (subcaudal) and caudal fins. The anal and dorsal fins consist of bony rays, divided into internal (hidden in the thickness of the muscles) pterygiophores (corresponding to radials) and external fin rays - lepidotrichia. The caudal fin is asymmetrical. In it, a continuation of the spine is the urostyle, and behind and below it, like a fan, there are flat triangular bones - hypuralia, derivatives of the lower arches of underdeveloped vertebrae. This type of fin structure is externally symmetrical, but not internally - homocercal. The external skeleton of the caudal fin is composed of numerous skin rays - lepidotrichia.
There is a difference in the location of the fins in space - in cartilaginous ones it is horizontal to support it in the water, and in bony ones it is vertical, since they have a swim bladder. Fins perform various functions when moving:
- unpaired - dorsal, caudal and anal fins, located in the same plane, help the movement of the fish;
- The paired pectoral and pelvic fins maintain balance and also serve as a rudder and brake.
Social buttons for Joomla
Pelvic fin
Page 1
The pelvic fins are fused and form a sucker. Black, Azov, Caspian and Far East. Spawning in the spring, eggs are laid in nests, the clutch is guarded by the male.
Topic 3. FISH FINS, THEIR DESIGNATIONS,
The pelvic fins have 1–17 rays, sometimes there are no fins. Scales are cycloid or absent. Veliferidae) and opahaceae (Lampri-dae); 12 births, approx. All, except Veliferidae, live in the pelagic zone of the open ocean at depth.
The rudiments of the pelvic fins appear. A notch on the dorsal edge of the fin fold marks the boundary between it and the growing caudal fin. There are more melanophores, some reaching the intestinal level.
The structure of the lancelet (diagram): / - central opening surrounded by tentacles; 2 - mouth; 3 - pharynx; 4 - gill slits: 5 - genitals: 6 - liver: 7 - intestine; 8 - anus; 9 - ventral fin: 10 - caudal fin; // - dorsal fin; / 2 - eyespot; 13 - olfactory fossa; 14 - brain; 15 - spinal cord; 16 - chord.
The pectoral and usually the dorsal and anal fins are absent. Pelvic fins with 2 rays or absent. The scales are cycloid or absent. The gill openings are connected into a single slit on the throat. The gills are usually reduced, and there are devices for air in the pharynx and intestines.
The pelvic fins are long, with 2–3 rays. Fossil forms are known from the Pleistocene and Holocene.
The anal and ventral fins are crimson. The iris of the eyes, unlike roaches, is greenish. Lives in rivers and reservoirs of Eurasia; in the USSR - in Europe. Siberia (before Lena), Puberty at 4 - 6 years.
The separation of the dorsal and anal fins begins. The rudiments of the pelvic fins appear. The rays in the caudal fin reach the posterior edge.
The dorsal and anal fins are long, almost reaching the caudal fin, the paired pelvic fins are in the form of long threads. The body of males has alternating blue and red transverse stripes; throat and parts of fins with metallic. Lives in overgrown reservoirs of the South. Produces sterile hybrids with labiaza (C.
Known from the Jurassic, they were numerous in the Cretaceous. In addition to the copula, organs (pterygopodia), formed from the outer rays of the ventral fins, males have spiny frontal and abdominal appendages that serve to hold the female.
The dorsal fin is short (7 - 14 rays), located above the ventral fins. They live in the waters of the North.
Haeckel): the formation of the gonads in higher animals in the mesoderm, and not in the ecto- or endoderm, as is the case in lower multicellular organisms; The formation and location of the paired ventral fins in some bony fishes is not behind, as usual, but in front of the pectoral fins.
Body laterally compressed or ovate, long. Pelvic fins are absent in some species. A network of seismosensory channels is developed on the head.
They are related to carpozoans and garfishes. There are usually 2 dorsal fins, the first one is made of flexible, unbranched rays, the ventral fins have 6 rays. The lateral line is poorly developed. Phallostethidae) and neostetidae (Neostethidae), ca.
The body in the anterior part is rounded, in the caudal part it is laterally compressed. The skin is covered with bony tubercles; the largest ones are arranged in longitudinal rows. The pelvic fins are modified into a round sucker. Adult fish are bluish-gray, the back is almost black; during spawning, the belly and fins of males are painted a deep red color.
Pages: 1 2 3
Fins and types of fish movement
Fins. Their sizes, shape, quantity, position and functions are different. The fins allow the body to maintain balance and participate in movement.
Rice. 1 Fins
The fins are divided into paired, corresponding to the limbs of higher vertebrates, and unpaired (Fig. 1).
TO doubles relate:
1) chest P ( pinna pectoralis);
2) abdominal V.
Paired fish fins
(R. ventralis).
TO unpaired:
1) dorsal D ( p. dorsalis);
2) anal A (R. analis);
3) tail C ( R. caudalis).
4) fat ar (( p.adiposa).
In salmonids, characins, killer whales, and others, there is a adipose fin(Fig. 2), devoid of fin rays ( p.adiposa).
Rice. 2 Adipose fin
Pectoral fins common in bony fishes. In stingrays, the pectoral fins are enlarged and are the main organs of movement.
Pelvic fins occupy different positions in fish, which is associated with a movement of the center of gravity caused by contraction of the abdominal cavity and concentration of viscera in the front part of the body.
Abdominal position– pelvic fins are located in the middle of the abdomen (sharks, herring, carp) (Fig. 3).
Rice. 3 Abdominal position
Thoracic position– the pelvic fins are shifted to the front of the body (perciform) (Fig. 4).
Rice. 4 Thoracic position
Jugular position– the pelvic fins are located in front of the pectoral fins and on the throat (cod fins) (Fig. 5).
Rice. 5 Jugular position
Dorsal fins there may be one (herring-like, carp-like), two (mullet-like, perch-like) or three (cod-like). Their location is different. In pike, the dorsal fin is shifted back, in herrings and cyprinids it is located in the middle of the body, in fish with a massive front part of the body (perch, cod) one of them is located closer to the head.
Anal fin Usually there is one, cod has two, and the spiny shark does not have one.
Caudal fin has a varied structure.
Depending on the size of the upper and lower blades, they are distinguished:
1)isobathic type – in the fin the upper and lower blades are the same (tuna, mackerel);
Rice. 6 Isobath type
2)hypobate type – the lower blade is lengthened (flying fish);
Rice. 7 Hypobate type
3)epibate type – the upper blade is lengthened (sharks, sturgeon).
Rice. 8. Epibathic type
Based on their shape and location relative to the end of the spine, several types are distinguished:
1) Protocercal type - in the form of a fin border (lamrey) (Fig. 9).
Rice. 9 Protocercal type -
2) Heterocercal type – asymmetrical, when the end of the spine enters the upper, most elongated blade of the fin (sharks, sturgeon) (Fig. 10).
Rice. 10 Heterocercal type;
3) Homocercal type – externally symmetrical, with the modified body of the last vertebra extending into the upper lobe (bony) (
Rice. 11 Homocercal type
The fins are supported by fin rays. In fish, branched and unbranched rays are distinguished (Fig. 12).
Unbranched fin rays can be:
1)articulated (capable of bending);
2)inarticulate hard (spiny), which in turn are smooth and jagged.
Rice. 12 Types of fin rays
The number of rays in the fins, especially in the dorsal and anal, is a species characteristic.
The number of spiny rays is indicated by Roman numerals, and the branched rays - by Arabic numerals. For example, the dorsal fin formula for river perch is:
DXIII-XVII, I-III 12-16.
This means that the perch has two dorsal fins, the first of which consists of 13 - 17 spiny fins, the second of 2 - 3 spiny and 12-16 branched rays.
Functions of fins
- Caudal fin creates a driving force, ensures high maneuverability of the fish when turning, and acts as a rudder.
- Thoracic and abdominal (paired fins ) maintain balance and act as rudders when turning and at depth.
- Dorsal and anal the fins act as a keel, preventing the body from rotating around its axis.
Material and equipment. Set of fixed fish – 30-40 species. Tables: Position of ventral fins; Fin modifications; Types of caudal fin; diagram of the position of the caudal fin of various shapes relative to the vortex zone. Tools: dissecting needles, tweezers, bath (one set for 2-3 students).
Exercise. When performing work, you need to consider the set of all types of fish: paired and unpaired fins, branched and unbranched, as well as articulated and unarticulated fin rays, the position of the pectoral fins and the three positions of the ventral fins. Find fish that do not have paired fins; with modified paired fins; with one, two and three dorsal swimmers; with one and two anal fins, as well as fish without an anal fin; with modified unpaired fins. Identify all types and shapes of the caudal fin.
Create formulas for the dorsal and anal fins for the fish species indicated by the teacher, and list the species of fish available in the set with different forms of the caudal fin.
Sketch branched and unbranched, articulated and non-articulated fin rays; fish with three positions of ventral fins; tail fins of fish of various shapes.
Fish fins can be paired or unpaired. The paired ones include the thoracic P (pinnapectoralis) and the abdominal V (pinnaventralis); to the unpaired ones - dorsal D (pinnadorsalis), anal A (pinnaanalis) and caudal C (pinnacaudalis). The exoskeleton of the fins of bony fishes consists of rays that can be branchy And unbranched. The upper part of the branched rays is divided into separate rays and has the appearance of a brush (branched). They are soft and located closer to the caudal end of the fin. Unbranched rays lie closer to the anterior edge of the fin and can be divided into two groups: articulated and non-articulated (spiny). Articulated the rays are divided along their length into separate segments; they are soft and can bend. Unarticulated– hard, with a sharp apex, tough, can be smooth or jagged (Fig. 10).
Figure 10 – Fin rays:
1 – unbranched, segmented; 2 – branched; 3 – prickly smooth; 4 – prickly jagged.
The number of branched and unbranched rays in the fins, especially in unpaired ones, is an important systematic feature. The rays are calculated and their number is recorded. Non-segmented (spiny) ones are designated by Roman numerals, branched ones - by Arabic numerals. Based on the calculation of the rays, a fin formula is compiled. So, pike perch has two dorsal fins. The first of them has 13-15 spiny rays (in different individuals), the second has 1-3 spines and 19-23 branched rays. The formula for the dorsal fin of pike perch is as follows: DXIII-XV,I-III19-23. In the anal fin of pike perch, the number of spiny rays is I-III, branched 11-14. The formula for the anal fin of pike perch looks like this: AII-III11-14.
Paired fins. All real fish have these fins. Their absence, for example, in moray eels (Muraenidae) is a secondary phenomenon, the result of late loss. Cyclostomes (Cyclostomata) do not have paired fins. This is a primary phenomenon.
The pectoral fins are located behind the gill slits of fish. In sharks and sturgeon, the pectoral fins are located in a horizontal plane and are inactive. These fish have a convex dorsal surface and a flattened ventral side of the body that gives them a resemblance to the profile of an airplane wing and creates lift when moving. Such an asymmetry of the body causes the appearance of a torque that tends to turn the fish’s head down. The pectoral fins and rostrum of sharks and sturgeons functionally constitute a single system: directed at a small (8-10°) angle to the movement, they create additional lifting force and neutralize the effect of rotational moment (Fig. 11). If a shark's pectoral fins are removed, it will raise its head upward to keep its body horizontal. In sturgeon fish, the removal of pectoral fins is not compensated for in any way due to poor flexibility of the body in the vertical direction, which is hampered by bugs, therefore, when the pectoral fins are amputated, the fish sinks to the bottom and cannot rise. Since the pectoral fins and rostrum in sharks and sturgeons are functionally connected, the strong development of the rostrum is usually accompanied by a decrease in the size of the pectoral fins and their removal from the anterior part of the body. This is clearly noticeable in the hammerhead shark (Sphyrna) and sawnose shark (Pristiophorus), whose rostrum is highly developed and the pectoral fins are small, while in the sea fox shark (Alopiias) and the blue shark (Prionace), the pectoral fins are well developed and the rostrum is small.
R 
Figure 11 – Diagram of vertical forces arising during the forward movement of a shark or sturgeon in the direction of the longitudinal axis of the body:
1 - center of gravity; 2 – center of dynamic pressure; 3 – force of residual mass; V 0 – lift force created by the body; V R– lifting force created by the pectoral fins; V r– lifting force created by the rostrum; V v– lifting force created by the pelvic fins; V With– lift force created by the caudal fin; Curved arrows show the effect of torque.
The pectoral fins of bony fish, unlike the fins of sharks and sturgeons, are located vertically and can perform rowing movements back and forth. The main function of the pectoral fins of bony fishes is low-speed propulsion, allowing precise maneuvering when searching for food. The pectoral fins, together with the pelvic and caudal fins, allow the fish to maintain balance when motionless. The pectoral fins of stingrays, which evenly border their body, serve as the main propellers when swimming.
The pectoral fins of fish are very diverse in both shape and size (Fig. 12). In flying fish, the length of the rays can be up to 81% of the body length, which allows
R 
Figure 12 – Shapes of pectoral fins of fish:
1 - flying fish; 2 – slider perch; 3 – keel belly; 4 – body; 5 – sea rooster; 6 - angler.
fish soar in the air. In freshwater fish, keelbellies from the Characin family, enlarged pectoral fins allow the fish to fly, reminiscent of the flight of birds. In gurnards (Trigla), the first three rays of the pectoral fins have turned into finger-like outgrowths, relying on which the fish can move along the bottom. Representatives of the order Anglerfish (Lophiiformes) have pectoral fins with fleshy bases that are also adapted to move along the ground and quickly bury themselves in it. Moving along hard substrates with the help of pectoral fins made these fins very mobile. When moving along the ground, anglerfish can rely on both pectoral and ventral fins. In catfish of the genus Clarias and blennies of the genus Blennius, the pectoral fins serve as additional supports during serpentine movements of the body while moving along the bottom. The pectoral fins of jumpers (Periophthalmidae) are arranged in a unique way. Their bases are equipped with special muscles that allow the fin to move forward and backward, and have a bend reminiscent of the elbow joint; The fin itself is located at an angle to the base. Living on coastal shallows, jumpers with the help of pectoral fins are able not only to move on land, but also to climb up plant stems, using the caudal fin with which they clasp the stem. With the help of pectoral fins, slider fish (Anabas) also move on land. Pushing off with their tail and clinging to plant stems with their pectoral fins and gill cover spines, these fish are able to travel from body of water to body of water, crawling hundreds of meters. In such bottom-dwelling fish as rock perches (Serranidae), sticklebacks (Gasterosteidae), and wrasse (Labridae), the pectoral fins are usually wide, rounded, and fan-shaped. When they work, undulation waves move vertically downward, the fish appears to be suspended in the water column and can rise upward like a helicopter. Fishes of the order Pufferfish (Tetraodontiformes), pipefish (Syngnathidae) and pipits (Hyppocampus), which have small gill slits (the gill cover is hidden under the skin), can make circular movements with their pectoral fins, creating an outflow of water from the gills. When the pectoral fins are amputated, these fish suffocate.
The pelvic fins perform mainly the function of balance and therefore, as a rule, are located near the center of gravity of the fish’s body. Their position changes with the change in the center of gravity (Fig. 13). In low-organized fish (herring-like, carp-like) the pelvic fins are located on the belly behind the pectoral fins, occupying abdominal position. The center of gravity of these fish is on the belly, which is due to the non-compact position of the internal organs occupying a large cavity. In highly organized fish, the pelvic fins are located in the front of the body. This position of the pelvic fins is called thoracic and is characteristic primarily of most perciform fish.
The pelvic fins can be located in front of the pectoral fins - on the throat. This arrangement is called jugular, and it is typical for large-headed fish with a compact arrangement of internal organs. The jugular position of the pelvic fins is characteristic of all fish of the order Codfish, as well as large-headed fish of the order Perciformes: stargazers (Uranoscopidae), nototheniids (Nototheniidae), blennies (Blenniidae), etc. Pelvic fins are absent in fish with eel-shaped and ribbon-shaped bodies. In erroneous (Ophidioidei) fish, which have a ribbon-eel-shaped body, the pelvic fins are located on the chin and serve as organs of touch.
R 
Figure 13 – Position of pelvic fins:
1 – abdominal; 2 – thoracic; 3 – jugular.
The pelvic fins can be modified. With their help, some fish attach to the ground (Fig. 14), forming either a suction funnel (gobies) or a suction disk (lumpfish, slugs). The ventral fins of sticklebacks, modified into spines, have a protective function, and in triggerfishes, the pelvic fins have the appearance of a spiny spine and, together with the spiny ray of the dorsal fin, are a protective organ. In male cartilaginous fish, the last rays of the ventral fins are transformed into pterygopodia - copulatory organs. In sharks and sturgeons, the pelvic fins, like the pectoral fins, serve as load-bearing planes, but their role is less than that of the pectoral fins, since they serve to increase lifting force.
R 
Figure 14 – Modification of the pelvic fins:
1 – suction funnel in gobies; 2 - suction disk of a slug.
Unpaired fins. As noted above, unpaired fins include the dorsal, anal and caudal.
The dorsal and anal fins act as stabilizers and resist lateral displacement of the body during tail action.
The large dorsal fin of sailfish acts as a rudder during sharp turns, greatly increasing the maneuverability of the fish when pursuing prey. The dorsal and anal fins of some fish act as propellers, imparting forward movement to the fish (Fig. 15).
R 
Figure 15 – Shape of undulating fins in various fish:
1 - sea Horse; 2 – sunflower; 3 – moon fish; 4 – body; 5 – needlefish; 6 – flounder; 7 - electric eel.
Locomotion with the help of undulating movements of the fins is based on the wave-like movements of the fin plate, caused by successive transverse deflections of the rays. This method of movement is usually characteristic of fish with a short body length that are unable to bend the body - boxfishes, sunfish. Only due to the undulation of the dorsal fin do seahorses and pipefish move. Fishes such as flounders and sunfishes, along with the undulating movements of the dorsal and anal fins, swim by laterally curving their body.
R 
Figure 16 – Topography of the passive locomotor function of unpaired fins in various fish:
1 – eel; 2 – cod; 3 – horse mackerel; 4 – tuna.
In slow-swimming fish with an eel-like body shape, the dorsal and anal fins, merging with the caudal fin, form in a functional sense a single fin bordering the body and have a passive locomotor function, since the main work falls on the body body. In fast-moving fish, as the speed of movement increases, the locomotor function is concentrated in the posterior part of the body and on the posterior parts of the dorsal and anal fins. An increase in speed leads to the loss of locomotor function by the dorsal and anal fins, reduction of their posterior sections, while the anterior sections perform functions not related to locomotion (Fig. 16).
In fast-swimming scombroid fish, the dorsal fin fits into a groove running along the back when moving.
Herring, garfish and other fish have one dorsal fin. Highly organized orders of bony fish (perciformes, mullets) usually have two dorsal fins. The first consists of spiny rays, which give it a certain lateral stability. These fish are called spiny-finned fish. Gadfish have three dorsal fins. Most fish have only one anal fin, but cod-like fish have two.
Some fish lack dorsal and anal fins. For example, the electric eel does not have a dorsal fin, the locomotor undulating apparatus of which is the highly developed anal fin; Stingrays do not have it either. Stingrays and sharks of the order Squaliformes do not have an anal fin.
R 
Figure 17 – Modified first dorsal fin of the sticky fish ( 1
) and anglerfish ( 2
).
The dorsal fin can be modified (Fig. 17). Thus, in the sticky fish, the first dorsal fin moved to the head and turned into a suction disk. It is, as it were, divided by partitions into a number of independently acting smaller, and therefore relatively more powerful, suction cups. The septa are homologous to the rays of the first dorsal fin; they can bend back, taking an almost horizontal position, or straighten. Due to their movement, a suction effect is created. In anglerfish, the first rays of the first dorsal fin, separated from each other, turned into a fishing rod (ilicium). In sticklebacks, the dorsal fin has the appearance of separate spines that perform a protective function. In triggerfish of the genus Balistes, the first ray of the dorsal fin has a locking system. It straightens and is fixed motionless. You can remove it from this position by pressing the third spiny ray of the dorsal fin. With the help of this ray and the spiny rays of the ventral fins, the fish, when in danger, hides in crevices, fixing the body in the floor and ceiling of the shelter.
In some sharks, the rear elongated lobes of the dorsal fins create a certain lifting force. A similar, but more significant, supporting force is created by the anal fin with a long base, for example, in catfishes.
The caudal fin acts as the main mover, especially with the scombroid type of movement, being the force that imparts forward movement to the fish. It provides high maneuverability of fish when turning. There are several forms of the caudal fin (Fig. 18).
R 
Figure 18 – Shapes of the caudal fin:
1 – protocentral; 2 – heterocercal; 3 – homocercal; 4 – diphycercal.
Protocercal, i.e., primarily equilobed, has the appearance of a border, and is supported by thin cartilaginous rays. The end of the chord enters the central part and divides the fin into two equal halves. This is the most ancient type of fin, characteristic of cyclostomes and larval stages of fish.
Diphycercal – symmetrical externally and internally. The spine is located in the middle of equal blades. It is characteristic of some lungfishes and lobe-finned fishes. Of the bony fishes, garfish and cod have such a fin.
Heterocercal, or asymmetrical, unequally lobed. The upper blade expands, and the end of the spine, bending, enters it. This type of fin is characteristic of many cartilaginous fishes and cartilaginous ganoids.
Homocercal, or falsely symmetrical. This fin can be externally classified as equilobed, but the axial skeleton is distributed unequally in the blades: the last vertebra (urostyle) extends into the upper blade. This type of fin is widespread and characteristic of most bony fish.
According to the ratio of the sizes of the upper and lower blades, the caudal fins can be epi-,hypo- And isobathic(ecclesiastical). With the epibate (epicercal) type, the upper lobe is longer (sharks, sturgeons); with hypobate (hypocercal) the upper lobe is shorter (flying fish, sabrefish), with isobathic (isocercal) both lobes have the same length (herring, tuna) (Fig. 19). The division of the caudal fin into two blades is associated with the peculiarities of counter currents of water flowing around the body of the fish. It is known that a friction layer is formed around a moving fish - a layer of water, to which a certain additional speed is imparted by the moving body. As the fish develops speed, the boundary layer of water may separate from the surface of the fish's body and a zone of vortices may form. If the body of the fish is symmetrical (relative to its longitudinal axis), the zone of vortices that arises behind is more or less symmetrical relative to this axis. In this case, to exit the zone of vortices and the friction layer, the blades of the caudal fin lengthen equally - isobathism, isocercia (see Fig. 19, a). With an asymmetrical body: a convex back and a flattened ventral side (sharks, sturgeons), the vortex zone and the friction layer are shifted upward relative to the longitudinal axis of the body, therefore the upper lobe elongates to a greater extent - epibathicity, epicercia (see Fig. 19, b). If fish have a more convex ventral and straight dorsal surface (siberian fish), the lower lobe of the caudal fin lengthens, since the vortex zone and the friction layer are more developed on the lower side of the body - hypobate, hypocercion (see Fig. 19, c). The higher the speed of movement, the more intense the process of vortex formation and the thicker the friction layer and the more developed the blades of the caudal fin, the ends of which must extend beyond the zone of vortices and the friction layer, which ensures high speeds. In fast-swimming fish, the caudal fin has either a semilunar shape - short with well-developed sickle-shaped elongated blades (scombroids), or forked - the notch of the tail goes almost to the base of the fish's body (horse mackerel, herring). In sedentary fish, during the slow movement of which the processes of vortex formation almost do not take place, the blades of the caudal fin are usually short - a notched caudal fin (carp, perch) or not differentiated at all - rounded (burbot), truncated (sunfish, butterfly fish), pointed ( captain's croakers).
R 
Figure 19 – Layout of the caudal fin blades relative to the vortex zone and friction layer for different body shapes:
A– with a symmetrical profile (isocercia); b– with a more convex profile contour (epicerkia); V– with a more convex lower contour of the profile (hypocercia). The vortex zone and friction layer are shaded.
The size of the caudal fin blades is usually related to the body height of the fish. The higher the body, the longer the caudal fin blades.
In addition to the main fins, fish may have additional fins on their body. These include fatty fin (pinnaadiposa), located behind the dorsal fin above the anal and representing a fold of skin without rays. It is typical for fish of the Salmon, Smelt, Grayling, Characin and some catfish families. On the caudal peduncle of a number of fast-swimming fish, behind the dorsal and anal fins, there are often small fins consisting of several rays.
R 
Figure 20 – Carinae on the caudal peduncle of fish:
A– in the herring shark; b- in mackerel.
They act as dampers for turbulence generated during the movement of fish, which helps to increase the speed of fish (scombroid, mackerel). On the caudal fin of herrings and sardines there are elongated scales (alae), which act as fairings. On the sides of the caudal peduncle in sharks, horse mackerel, mackerel, and swordfish there are lateral keels, which help reduce the lateral bendability of the caudal peduncle, which improves the locomotor function of the caudal fin. In addition, the side keels serve as horizontal stabilizers and reduce vortex formation when the fish swims (Fig. 20).
Self-test questions:
Which fins are included in the group of paired and unpaired? Give their Latin designations.
What fish have an adipose fin?
What types of fin rays can be distinguished and how do they differ?
Where are the pectoral fins of fish located?
Where are the ventral fins of fish located and what determines their position?
Give examples of fish with modified pectoral, pelvic and dorsal fins.
What fish do not have pelvic and pectoral fins?
What are the functions of paired fins?
What role do the dorsal and anal fins of fish play?
What types of caudal fin structure are distinguished in fish?
What are epibate, hiobate, isobathous caudal fins?
All fins in fish are divided into paired, which correspond to the limbs of higher vertebrates, and unpaired. Paired fins include pectoral (P - pinna pectoralis) and ventral (V - pinna ventralis). Unpaired fins include the dorsal fin (D - p. dorsalis); anal (A - r. analis) and caudal (C - r. caudalis).
A number of fish (salmonids, characins, killer whales, etc.) have an adipose fin behind the dorsal fin; it lacks fin rays (p.adiposa).
Pectoral fins are common in bony fishes, while they are absent in moray eels and some others. Lampreys and hagfish are completely devoid of pectoral and ventral fins. In stingrays, the pectoral fins are greatly enlarged and play the main role as organs of their movement. Pectoral fins have developed especially strongly in flying fish. The three rays of the pectoral fin of the gurnard serve as legs when crawling on the ground.
The pelvic fins can occupy different positions. Abdominal position - they are located approximately in the middle of the abdomen (sharks, herring-shaped, carp-shaped). In the thoracic position, they are shifted to the front of the body (perch-shaped). Jugular position, fins located in front of the pectorals and on the throat (cod).
In some fish, the pelvic fins are transformed into spines (stickleback) or suckers (leaffish). In male sharks and rays, the posterior rays of the pelvic fins have been transformed into copulatory organs in the process of evolution. They are completely absent in eels, catfish, etc.
There may be a variable number of dorsal fins. In herring and cyprinids it is one, in mullet and perch morphs there are two, in cod morphs there are three. Their location may vary. In pike it is shifted far back, in herring and carp fish - in the middle of the body, in perch and cod - closer to the head. The longest and highest dorsal fin of the sailfish. In flounder, it looks like a long ribbon running along the entire back and, at the same time as the anal one, is their main organ of movement. Mackerel, tuna and saury have small additional fins behind the dorsal and anal fins.
Individual rays of the dorsal fin sometimes extend into long threads, and in the monkfish, the first ray of the dorsal fin is shifted to the muzzle and transformed into a kind of fishing rod, just like in the deep-sea anglerfish. The first dorsal fin of the sticky fish also moved to the head and turned into a real sucker. The dorsal fin in sedentary benthic fish species is poorly developed (catfish) or absent (stingrays, electric eel).
Tail fin:
1) isobathic – the upper and lower blades are the same (tuna, mackerel);
2) hypobate – the lower lobe is elongated (flying fish);
3) epibate – the upper lobe is elongated (sharks, sturgeons).
Types of caudal fins: forked (herring), notched (salmon), truncated (cod), rounded (burbot, gobies), semilunate (tuna, mackerel), pointed (elpout).
From the very beginning, the fins have been assigned the function of movement and maintaining balance, but sometimes they also perform other functions. The main fins are dorsal, caudal, anal, two ventral and two pectoral. They are divided into unpaired - dorsal, anal and caudal, and paired - pectoral and abdominal. Some species also have an adipose fin located between the dorsal and caudal fins. All fins are driven by muscles. In many species, the fins are often modified. Thus, in male viviparous fish, the modified anal fin has turned into a mating organ; some species have well-developed pectoral fins, which allows the fish to jump out of the water. Gourami have special tentacles, which are thread-like pelvic fins. And some species that burrow into the ground often lack fins. Guppy tail fins are also an interesting creation of nature (there are about 15 species of them and their number is growing all the time). The movement of the fish begins with the tail and caudal fin, which send the body of the fish forward with a strong blow. The dorsal and anal fins provide balance to the body. The pectoral fins move the body of the fish during slow swimming, serve as a rudder, and, together with the pelvic and caudal fins, ensure the equilibrium position of the body when it is at rest. In addition, some species of fish can rely on pectoral fins or move with their help on hard surfaces. The pelvic fins perform mainly a balancing function, but in some species they are modified into a suction disc, which allows the fish to stick to a hard surface.
1. Dorsal fin.
2. Adipose fin.
3. Caudal fin.
4. Pectoral fin.
5. Pelvic fin.
6. Anal fin.
The structure of a fish. Types of tail fins: 
Truncated
Split
Lyre-shaped
24. Structure of fish skin. The structure of the main types of fish scales, their functions.
Fish skin performs a number of important functions. Located on the border between the external and internal environments of the body, it protects the fish from external influences. At the same time, separating the fish body from the surrounding liquid environment with chemicals dissolved in it, the fish skin is an effective homeostatic mechanism.
Fish skin quickly regenerates. Through the skin, on the one hand, partial release of the final metabolic products occurs, and on the other, the absorption of certain substances from the external environment (oxygen, carbonic acid, water, sulfur, phosphorus, calcium and other elements that play a large role in life). The skin plays an important role as a receptor surface: thermo-, barochemo- and other receptors are located in it. In the thickness of the corium, the integumentary bones of the skull and pectoral fin girdles are formed.
In fish, the skin also performs a rather specific – supporting – function. Muscle fibers of skeletal muscles are attached to the inner side of the skin. Thus, it acts as a supporting element in the musculoskeletal system.
Fish skin consists of two layers: an outer layer of epithelial cells, or epidermis, and an inner layer of connective tissue cells - the skin itself, dermis, corium, cutis. Between them there is a basement membrane. The skin is underlain by a loose connective tissue layer (subcutaneous connective tissue, subcutaneous tissue). In many fish, fat is deposited in the subcutaneous tissue.
The epidermis of fish skin is represented by multilayer epithelium, consisting of 2–15 rows of cells. The cells of the upper layer of the epidermis are flat in shape. The lower (germ) layer is represented by one row of cylindrical cells, which, in turn, originate from the prismatic cells of the basement membrane. The middle layer of the epidermis consists of several rows of cells, the shape of which varies from cylindrical to flat.
The outermost layer of epithelial cells becomes keratinized, but unlike terrestrial vertebrates in fish, it does not die, maintaining contact with living cells. During the life of a fish, the intensity of keratinization of the epidermis does not remain unchanged; it reaches its greatest degree in some fish before spawning: for example, in male cyprinids and whitefishes, the so-called Pearly rash is a mass of small white bumps that make the skin feel rough. After spawning it disappears.
The dermis (cutis) consists of three layers: a thin upper (connective tissue), a thick middle mesh layer of collagen and elastin fibers and a thin basal layer of tall prismatic cells, giving rise to the two upper layers.
In active pelagic fish the dermis is well developed. Its thickness in areas of the body that provide intense movement (for example, on the caudal peduncle of a shark) is greatly increased. The middle layer of the dermis in active swimmers can be represented by several rows of strong collagen fibers, which are also connected to each other by transverse fibers.
In slow-swimming littoral and bottom-dwelling fish, the dermis is loose or generally underdeveloped. In fast-swimming fish, there is no subcutaneous tissue in the parts of the body that provide swimming (for example, the caudal peduncle). In these places, muscle fibers are attached to the dermis. In other fish (most often slow ones), the subcutaneous tissue is well developed.
The structure of fish scales:
Placoid (it is very ancient);
Ganoid;
Cycloid;
Ctenoid (youngest).
Placoid fish scales
Placoid fish scales(photo above) is characteristic of modern and fossil cartilaginous fish - and these are sharks and rays. Each such scale has a plate and a spine sitting on it, the tip of which extends out through the epidermis. The basis of this scale is dentin. The spike itself is covered with even harder enamel. The placoid scale inside has a cavity that is filled with pulp - pulp, it has blood vessels and nerve endings.
Ganoid fish scales
Ganoid fish scales has the appearance of a rhombic plate and the scales are connected to each other, forming a dense shell on the fish. Each such scale consists of a very hard substance - the upper part is made of ganoine, and the lower part is made of bone. A large number of fossil fish have this type of scale, as well as the upper parts in the caudal fin of modern sturgeon.
Cycloid fish scales
Cycloid fish scales found in bony fish and does not have a ganoine layer.
Cycloid scales have a rounded neck with a smooth surface.
Ctenoid fish scales
Ctenoid fish scales also found in bony fish and does not have a layer of ganoine; it has spines on the back side. 
Usually the scales of these fish are arranged in a tiled manner, and each scale is covered in front and on both sides by the same scales. It turns out that the rear end of the scale comes out, but underneath it is lined with another scale and this type of cover preserves the flexibility and mobility of the fish. Annual rings on the scales of a fish allow one to determine its age.
The arrangement of scales on the body of a fish occurs in rows, and the number of rows and the number of scales in a longitudinal row does not change with changes in the age of the fish, which is an important systematic feature for different species. Let's take this example - the lateral line of a golden crucian carp has 32-36 scales, while a pike has 111-148.
; their organs that regulate movement and position in water, and in some ( flying fish) - also planning in the air.
The fins are cartilaginous or bony rays (radials) with skin-epidermal coverings on top.
The main types of fish fins are dorsal, anal, caudal, pair of abdominal and pair of pectoral.
Some fish also have adipose fins(they lack fin rays), located between the dorsal and caudal fins.
The fins are driven by muscles.
Often, different species of fish have modified fins, for example, males viviparous fish use the anal fin as an organ for mating (the main function of the anal fin is similar to the function of the dorsal fin - it is a keel when the fish moves); at gourami modified thread-like ventral fins are special tentacles; highly developed pectoral fins allow some fish to jump out of the water.
The fins of fish actively participate in movement, balancing the body of the fish in the water. In this case, the motor moment begins from the caudal fin, which pushes forward with a sharp movement. The tail fin is a kind of propulsion device for the fish. The dorsal and anal fins balance the fish's body in the water.
Different species of fish have different numbers of dorsal fins.
Herring and carp-like have one dorsal fin mullet-like and perch-like- two, y codlike- three.
They can also be located differently: pike- displaced far back, at herring-like, carp-like- in the middle of the ridge, at perch and cod- closer to the head. U mackerel, tuna and saury there are small additional fins behind the dorsal and anal fins.
The pectoral fins are used by the fish when swimming slowly, and together with the pelvic and caudal fins they maintain the balance of the fish’s body in the water. Many bottom-dwelling fish move along the ground using pectoral fins.
However, in some fish ( moray eels, for example) pectoral and ventral fins are absent. Some species also lack a tail: gymnots, ramfichtids, seahorses, stingrays, sunfish and other species.
Three-spined stickleback
In general, the more developed a fish's fins, the more suited it is to swimming in calm water.
In addition to movement in water, air, on the ground; jumping, jumping, fins help different types of fish attach to the substrate (sucker fins in bulls), look for food ( triggles), have protective functions ( sticklebacks).
Some types of fish ( scorpionfish) have poisonous glands at the base of the spines of the dorsal fin. There are also fish without fins at all: cyclostomes.
Fins organs of movement of aquatic animals. Among invertebrates, P. have pelagic forms of gastropods and cephalopods and chaeto-maxillary mollusks. In gastropods, the legs are a modified leg; in cephalopods, they are lateral folds of skin. The chaetomagnaths are characterized by lateral and caudal wings formed by folds of skin. Among modern vertebrates, cyclostomes, fish, some amphibians, and mammals have P. In cyclostomes there are only unpaired P.: anterior and posterior dorsal (in lampreys) and caudal. In fish, there are paired and unpaired P. Paired ones are represented by anterior (thoracic) and posterior (abdominal) ones. In some fish, such as cod and blenny, the abdominal pectorals are sometimes located in front of the pectoral ones. The skeleton of paired limbs consists of cartilaginous or bone rays, which are attached to the skeleton of the limb girdles (See Limb girdles) ( rice. 1
). The main function of paired propellers is the direction of fish movement in the vertical plane (depth rudders). In a number of fish, paired parasites perform the functions of active swimming organs (See Swimming) or are used for gliding in the air (in flying fish), crawling along the bottom, or moving on land (in fish that periodically leave the water, for example, in representatives of the tropical genus Periophthalmus , which, with the help of chest pectorals, can even climb trees). The skeleton of unpaired P. - dorsal (often divided into 2 and sometimes into 3 parts), anus (sometimes divided into 2 parts) and caudal - consists of cartilaginous or bone rays lying between the lateral muscles of the body ( rice. 2
). The skeletal rays of the caudal vertebrae are connected to the posterior end of the spine (in some fish they are replaced by the spinous processes of the vertebrae). The peripheral parts of the P. are supported by thin rays of horn-like or bone tissue. In spiny-finned fish, the anterior of these rays thicken and form hard spines, sometimes associated with poisonous glands. Muscles that stretch the lobe of the pancreas are attached to the base of these rays. The dorsal and anal parasites serve to regulate the direction of movement of the fish, but sometimes they can also be organs of forward movement or perform additional functions (for example, attracting prey). The caudal part, which varies greatly in shape in different fish, is the main organ of movement. In the process of the evolution of vertebrates, the P. of fish probably arose from a continuous fold of skin that ran along the back of the animal, went around the rear end of its body and continued on the ventral side to the anus, then divided into two lateral folds that continued to the gill slits; This is the position of the fin folds in the modern primitive chordate - Lancelet a. It can be assumed that during the evolution of animals, skeletal elements formed in some places of such folds and in the intervals the folds disappeared, which led to the emergence of unpaired folds in cyclostomes and fish, and paired ones in fish. This is supported by the presence of lateral folds or venom of spines in the most ancient vertebrates (some jawless animals, acanthodia) and the fact that in modern fish, paired spines are longer in the early stages of development than in adulthood. Among amphibians, unpaired amphibians, in the form of a fold of skin devoid of a skeleton, are present as permanent or temporary formations in most larvae living in water, as well as in adult caudate amphibians and the larvae of tailless amphibians. Among mammals, P. are found in cetaceans and lilacs that have switched to an aquatic lifestyle for the second time. Gypsy cetaceans (vertical dorsal and horizontal caudal) and lilacs (horizontal caudal) do not have a skeleton; these are secondary formations that are not homologous (see Homology) to the unpaired P. of fish. The paired limbs of cetaceans and lilacs, represented only by the anterior limbs (the hind limbs are reduced), have an internal skeleton and are homologous to the forelimbs of all other vertebrates. Lit. Guide to Zoology, vol. 2, M.-L., 1940; Shmalgauzen I.I., Fundamentals of comparative anatomy of vertebrate animals, 4th ed., M., 1947; Suvorov E.K., Fundamentals of Ichthyology, 2nd ed., M., 1947; Dogel V.A., Zoology of invertebrates, 5th ed., M., 1959; Aleev Yu. G., Functional principles of the external structure of fish, M., 1963. V. N. Nikitin.
Great Soviet Encyclopedia. - M.: Soviet Encyclopedia. 1969-1978 .
See what “Fins” are in other dictionaries:
- (pterigiae, pinnae), organs of movement or regulation of body position of aquatic animals. Among invertebrates, pelagics have P. forms of certain mollusks (modified leg or fold of skin), bristle-jawed. In skullless fish and larvae of fish, the unpaired P.... ... Biological encyclopedic dictionary
Organs of movement or regulation of body position of aquatic animals (some mollusks, chaetognaths, lancelets, cyclostomes, fish, some amphibians and mammals, cetaceans and sirenids). They can be paired or unpaired. * * * FINS… … encyclopedic Dictionary
Organs of movement or regulation of body position of aquatic animals (some mollusks, chaetognaths, lancelets, cyclostomes, fish, some amphibians and mammals, cetaceans and sirenids). There are paired and unpaired fins... Big Encyclopedic Dictionary
Loading...
