• 02.12.2015

  The cooler (fan) temperature sensor starts working when the temperature rises to the set value and turns off when it drops. Power is supplied to the cooler through a relay (12V, 200 Ohm). The temperature sensor is a negative temperature coefficient thermistor. The operational amplifier LM311 is used as a comparator. As the temperature increases, the resistance of the thermistor decreases, and accordingly the voltage drops by ...

• 06.04.2015

  The K1182GG3R microcircuit is an integrated circuit of a high-voltage half-bridge self-oscillator. It is manufactured using a unique bipolar technology developed for a class of ICs oriented for use in AC networks up to 240V. The IC converts DC voltage (in particular, rectified mains voltage) into a high-frequency voltage of 30-50 kHz and allows the creation of galvanically isolated secondary power supplies of up to 12 W. Element ratings for input voltage 220V...

• 14.07.2015

  As you know, the voltage of the vehicle’s on-board network is in the range from 12 to 14.4V, which imposes a limitation on the power of the AF amplifiers used. To increase the output power of the amplifier, it is necessary to use a voltage converter. The TDA1562Q chip allows you to easily solve this problem. The output power of the amplifier on the TDA1562Q is 18 W (14.4 V Rн = 4 Ohm), with increasing power the amplifier goes into ...

• 23.09.2014

  The machine works with 7 light bulbs and creates the effect of a light line, which first gradually grows from the central luminous point, and then goes out gradually from the center to the edges. The machine controls 15W 220V light bulbs. The circuit consists of a multivibrator that sets the pulsation periodicity, three delay lines and four output thyristors. The frequency of repetition of pulsations depends on...

First level

Degree and its properties. The Comprehensive Guide (2019)

Why are degrees needed? Where will you need them? Why should you take the time to study them?

To learn everything about degrees, what they are needed for, and how to use your knowledge in everyday life, read this article.

And, of course, knowledge of degrees will bring you closer to successfully passing the Unified State Exam or Unified State Exam and to entering the university of your dreams.

Let's go... (Let's go!)

Important note! If you see gobbledygook instead of formulas, clear your cache. To do this, press CTRL+F5 (on Windows) or Cmd+R (on Mac).

FIRST LEVEL

Exponentiation is a mathematical operation just like addition, subtraction, multiplication or division.

Now I will explain everything in human language using very simple examples. Be careful. The examples are elementary, but explain important things.

Let's start with addition.

There is nothing to explain here. You already know everything: there are eight of us. Everyone has two bottles of cola. How much cola is there? That's right - 16 bottles.

Now multiplication.

The same example with cola can be written differently: . Mathematicians are cunning and lazy people. They first notice some patterns, and then figure out a way to “count” them faster. In our case, they noticed that each of the eight people had the same number of cola bottles and came up with a technique called multiplication. Agree, it is considered easier and faster than.

So, to count faster, easier and without errors, you just need to remember multiplication table. Of course, you can do everything slower, more difficult and with mistakes! But…

Here is the multiplication table. Repeat.

And another, more beautiful one:

What other clever counting tricks have lazy mathematicians come up with? Right - raising a number to a power.

Raising a number to a power

If you need to multiply a number by itself five times, then mathematicians say that you need to raise that number to the fifth power. For example, . Mathematicians remember that two to the fifth power is... And they solve such problems in their heads - faster, easier and without mistakes.

All you need to do is remember what is highlighted in color in the table of powers of numbers. Believe me, this will make your life a lot easier.

By the way, why is it called the second degree? square numbers, and the third - cube? What does it mean? Very good question. Now you will have both squares and cubes.

Real life example #1

Let's start with the square or the second power of the number.

Imagine a square pool measuring one meter by one meter. The pool is at your dacha. It's hot and I really want to swim. But... the pool has no bottom! You need to cover the bottom of the pool with tiles. How many tiles do you need? In order to determine this, you need to know the bottom area of ​​the pool.

You can simply calculate by pointing your finger that the bottom of the pool consists of meter by meter cubes. If you have tiles one meter by one meter, you will need pieces. It's easy... But where have you seen such tiles? The tile will most likely be cm by cm. And then you will be tortured by “counting with your finger.” Then you have to multiply. So, on one side of the bottom of the pool we will fit tiles (pieces) and on the other, too, tiles. Multiply by and you get tiles ().

Did you notice that to determine the area of ​​the pool bottom we multiplied the same number by itself? What does it mean? Since we are multiplying the same number, we can use the “exponentiation” technique. (Of course, when you have only two numbers, you still need to multiply them or raise them to a power. But if you have a lot of them, then raising them to a power is much easier and there are also fewer errors in calculations. For the Unified State Exam, this is very important).
So, thirty to the second power will be (). Or we can say that thirty squared will be. In other words, the second power of a number can always be represented as a square. And vice versa, if you see a square, it is ALWAYS the second power of some number. A square is an image of the second power of a number.

Real life example #2

Here's a task for you: count how many squares there are on the chessboard using the square of the number... On one side of the cells and on the other too. To calculate their number, you need to multiply eight by eight or... if you notice that a chessboard is a square with a side, then you can square eight. You will get cells. () So?

Real life example #3

Now the cube or the third power of a number. The same pool. But now you need to find out how much water will have to be poured into this pool. You need to calculate the volume. (Volumes and liquids, by the way, are measured in cubic meters. Unexpected, right?) Draw a pool: the bottom is a meter in size and a meter deep, and try to count how many cubes measuring a meter by a meter will fit into your pool.

Just point your finger and count! One, two, three, four...twenty-two, twenty-three...How many did you get? Not lost? Is it difficult to count with your finger? So that! Take an example from mathematicians. They are lazy, so they noticed that in order to calculate the volume of the pool, you need to multiply its length, width and height by each other. In our case, the volume of the pool will be equal to cubes... Easier, right?

Now imagine how lazy and cunning mathematicians are if they simplified this too. We reduced everything to one action. They noticed that the length, width and height are equal and that the same number is multiplied by itself... What does this mean? This means you can take advantage of the degree. So, what you once counted with your finger, they do in one action: three cubed is equal. It is written like this: .

All that remains is remember the table of degrees. Unless, of course, you are as lazy and cunning as mathematicians. If you like to work hard and make mistakes, you can continue to count with your finger.

Well, to finally convince you that degrees were invented by quitters and cunning people to solve their life problems, and not to create problems for you, here are a couple more examples from life.

Real life example #4

You have a million rubles. At the beginning of each year, for every million you make, you make another million. That is, every million you have doubles at the beginning of each year. How much money will you have in years? If you are sitting now and “counting with your finger,” then you are a very hardworking person and... stupid. But most likely you will give an answer in a couple of seconds, because you are smart! So, in the first year - two multiplied by two... in the second year - what happened, by two more, in the third year... Stop! You noticed that the number is multiplied by itself times. So two to the fifth power is a million! Now imagine that you have a competition and the one who can count the fastest will get these millions... It’s worth remembering the powers of numbers, don’t you think?

Real life example #5

You have a million. At the beginning of each year, for every million you make, you earn two more. Great isn't it? Every million is tripled. How much money will you have in a year? Let's count. The first year - multiply by, then the result by another... It’s already boring, because you already understood everything: three is multiplied by itself times. So to the fourth power it is equal to a million. You just have to remember that three to the fourth power is or.

Now you know that by raising a number to a power you will make your life a lot easier. Let's take a further look at what you can do with degrees and what you need to know about them.

Terms and concepts... so as not to get confused

So, first, let's define the concepts. What do you think, what is an exponent? It's very simple - it's the number that is "at the top" of the power of the number. Not scientific, but clear and easy to remember...

Well, at the same time, what such a degree basis? Even simpler - this is the number that is located below, at the base.

Here's a drawing for good measure.

Well, in general terms, in order to generalize and remember better... A degree with a base “ ” and an exponent “ ” is read as “to the degree” and is written as follows:

Power of a number with natural exponent

You probably already guessed: because the exponent is a natural number. Yes, but what is it natural number? Elementary! Natural numbers are those numbers that are used in counting when listing objects: one, two, three... When we count objects, we do not say: “minus five,” “minus six,” “minus seven.” We also do not say: “one third”, or “zero point five”. These are not natural numbers. What numbers do you think these are?

Numbers like “minus five”, “minus six”, “minus seven” refer to whole numbers. In general, integers include all natural numbers, numbers opposite to natural numbers (that is, taken with a minus sign), and number. Zero is easy to understand - it is when there is nothing. What do negative (“minus”) numbers mean? But they were invented primarily to indicate debts: if you have a balance on your phone in rubles, this means that you owe the operator rubles.

All fractions are rational numbers. How did they arise, do you think? Very simple. Several thousand years ago, our ancestors discovered that they lacked natural numbers to measure length, weight, area, etc. And they came up with rational numbers... Interesting, isn't it?

There are also irrational numbers. What are these numbers? In short, it's an infinite decimal fraction. For example, if you divide the circumference of a circle by its diameter, you get an irrational number.

Summary:

Let us define the concept of a degree whose exponent is a natural number (i.e., integer and positive).

1. Any number to the first power is equal to itself:
2. To square a number means to multiply it by itself:
3. To cube a number means to multiply it by itself three times:

Definition. Raising a number to a natural power means multiplying the number by itself times:
.

Properties of degrees

Where did these properties come from? I will show you now.

Let's see: what is it And ?

A-priory:

How many multipliers are there in total?

It’s very simple: we added multipliers to the factors, and the result is multipliers.

But by definition, this is a power of a number with an exponent, that is: , which is what needed to be proven.

Example: Simplify the expression.

Solution:

Example: Simplify the expression.

Solution: It is important to note that in our rule Necessarily there must be the same reasons!
Therefore, we combine the powers with the base, but it remains a separate factor:

only for the product of powers!

Under no circumstances can you write that.

2. that's it th power of a number

Just as with the previous property, let us turn to the definition of degree:

It turns out that the expression is multiplied by itself times, that is, according to the definition, this is the th power of the number:

In essence, this can be called “taking the indicator out of brackets.” But you can never do this in total:

Let's remember the abbreviated multiplication formulas: how many times did we want to write?

But this is not true, after all.

Power with negative base

Up to this point, we have only discussed what the exponent should be.

But what should be the basis?

In powers of natural indicator the basis may be any number. Indeed, we can multiply any numbers by each other, be they positive, negative, or even.

Let's think about which signs ("" or "") will have degrees of positive and negative numbers?

For example, is the number positive or negative? A? ? With the first one, everything is clear: no matter how many positive numbers we multiply by each other, the result will be positive.

But the negative ones are a little more interesting. We remember the simple rule from 6th grade: “minus for minus gives a plus.” That is, or. But if we multiply by, it works.

Determine for yourself what sign the following expressions will have:

1)	2)	3)
4)	5)	6)

Did you manage?

Here are the answers: In the first four examples, I hope everything is clear? We simply look at the base and exponent and apply the appropriate rule.

1) ; 2) ; 3) ; 4) ; 5) ; 6) .

In example 5) everything is also not as scary as it seems: after all, it doesn’t matter what the base is equal to - the degree is even, which means the result will always be positive.

Well, except when the base is zero. The base is not equal, is it? Obviously not, since (because).

Example 6) is no longer so simple!

6 examples to practice

Analysis of the solution 6 examples

If we ignore the eighth power, what do we see here? Let's remember the 7th grade program. So, do you remember? This is the formula for abbreviated multiplication, namely the difference of squares! We get:

Let's look carefully at the denominator. It looks a lot like one of the numerator factors, but what's wrong? The order of the terms is wrong. If they were reversed, the rule could apply.

But how to do that? It turns out that it’s very easy: the even degree of the denominator helps us here.

Magically the terms changed places. This “phenomenon” applies to any expression to an even degree: we can easily change the signs in parentheses.

But it's important to remember: all signs change at the same time!

Let's go back to the example:

And again the formula:

Whole we call the natural numbers, their opposites (that is, taken with the " " sign) and the number.

positive integer, and it is no different from natural, then everything looks exactly like in the previous section.

Now let's look at new cases. Let's start with an indicator equal to.

Any number to the zero power is equal to one:

As always, let us ask ourselves: why is this so?

Let's consider some degree with a base. Take, for example, and multiply by:

So, we multiplied the number by, and we got the same thing as it was - . What number should you multiply by so that nothing changes? That's right, on. Means.

We can do the same with an arbitrary number:

Let's repeat the rule:

Any number to the zero power is equal to one.

But there are exceptions to many rules. And here it is also there - this is a number (as a base).

On the one hand, it must be equal to any degree - no matter how much you multiply zero by itself, you will still get zero, this is clear. But on the other hand, like any number to the zero power, it must be equal. So how much of this is true? The mathematicians decided not to get involved and refused to raise zero to the zero power. That is, now we cannot not only divide by zero, but also raise it to the zero power.

Let's move on. In addition to natural numbers and numbers, integers also include negative numbers. To understand what a negative power is, let’s do as last time: multiply some normal number by the same number to a negative power:

From here it’s easy to express what you’re looking for:

Now let’s extend the resulting rule to an arbitrary degree:

So, let's formulate a rule:

A number with a negative power is the reciprocal of the same number with a positive power. But at the same time The base cannot be null:(because you can’t divide by).

Let's summarize:

I. The expression is not defined in the case. If, then.

II. Any number to the zero power is equal to one: .

III. A number not equal to zero to a negative power is the inverse of the same number to a positive power: .

Tasks for independent solution:

Well, as usual, examples for independent solutions:

Analysis of problems for independent solution:

I know, I know, the numbers are scary, but on the Unified State Exam you have to be prepared for anything! Solve these examples or analyze their solutions if you couldn’t solve them and you will learn to cope with them easily in the exam!

Let's continue to expand the range of numbers “suitable” as an exponent.

Now let's consider rational numbers. What numbers are called rational?

Answer: everything that can be represented as a fraction, where and are integers, and.

To understand what it is "fractional degree", consider the fraction:

Let's raise both sides of the equation to a power:

Now let's remember the rule about "degree to degree":

What number must be raised to a power to get?

This formulation is the definition of the root of the th degree.

Let me remind you: the root of the th power of a number () is a number that, when raised to a power, is equal to.

That is, the root of the th power is the inverse operation of raising to a power: .

It turns out that. Obviously, this special case can be expanded: .

Now we add the numerator: what is it? The answer is easy to obtain using the power-to-power rule:

But can the base be any number? After all, the root cannot be extracted from all numbers.

None!

Let us remember the rule: any number raised to an even power is a positive number. That is, it is impossible to extract even roots from negative numbers!

This means that such numbers cannot be raised to a fractional power with an even denominator, that is, the expression does not make sense.

What about the expression?

But here a problem arises.

The number can be represented in the form of other, reducible fractions, for example, or.

And it turns out that it exists, but does not exist, but these are just two different records of the same number.

Or another example: once, then you can write it down. But if we write down the indicator differently, we will again get into trouble: (that is, we got a completely different result!).

To avoid such paradoxes, we consider only positive base exponent with fractional exponent.

So if:

• - natural number;
• - integer;

Examples:

Rational exponents are very useful for transforming expressions with roots, for example:

5 examples to practice

Analysis of 5 examples for training

Well, now comes the hardest part. Now we'll figure it out degree with irrational exponent.

All the rules and properties of degrees here are exactly the same as for a degree with a rational exponent, with the exception

After all, by definition, irrational numbers are numbers that cannot be represented as a fraction, where and are integers (that is, irrational numbers are all real numbers except rational ones).

When studying degrees with natural, integer and rational exponents, each time we created a certain “image”, “analogy”, or description in more familiar terms.

For example, a degree with a natural exponent is a number multiplied by itself several times;

...number to the zeroth power- this is, as it were, a number multiplied by itself once, that is, they have not yet begun to multiply it, which means that the number itself has not even appeared yet - therefore the result is only a certain “blank number”, namely a number;

...negative integer degree- it’s as if some “reverse process” had occurred, that is, the number was not multiplied by itself, but divided.

By the way, in science a degree with a complex exponent is often used, that is, the exponent is not even a real number.

But at school we don’t think about such difficulties; you will have the opportunity to comprehend these new concepts at the institute.

WHERE WE ARE SURE YOU WILL GO! (if you learn to solve such examples :))

For example:

Decide for yourself:

Analysis of solutions:

1. Let's start with the usual rule for raising a power to a power:

Now look at the indicator. Doesn't he remind you of anything? Let us recall the formula for abbreviated multiplication of difference of squares:

In this case,

It turns out that:

Answer: .

2. We reduce fractions in exponents to the same form: either both decimals or both ordinary ones. We get, for example:

Answer: 16

3. Nothing special, we use the usual properties of degrees:

ADVANCED LEVEL

Determination of degree

A degree is an expression of the form: , where:

• — degree base;
• - exponent.

Degree with natural indicator (n = 1, 2, 3,...)

Raising a number to the natural power n means multiplying the number by itself times:

Degree with an integer exponent (0, ±1, ±2,...)

If the exponent is positive integer number:

Construction to the zero degree:

The expression is indefinite, because, on the one hand, to any degree is this, and on the other hand, any number to the th degree is this.

If the exponent is negative integer number:

(because you can’t divide by).

Once again about zeros: the expression is not defined in the case. If, then.

Examples:

Power with rational exponent

• - natural number;
• - integer;

Examples:

Properties of degrees

To make it easier to solve problems, let’s try to understand: where did these properties come from? Let's prove them.

Let's see: what is and?

A-priory:

So, on the right side of this expression we get the following product:

But by definition it is a power of a number with an exponent, that is:

Q.E.D.

Example : Simplify the expression.

Solution : .

Example : Simplify the expression.

Solution : It is important to note that in our rule Necessarily there must be the same reasons. Therefore, we combine the powers with the base, but it remains a separate factor:

Another important note: this rule - only for product of powers!

Under no circumstances can you write that.

Just as with the previous property, let us turn to the definition of degree:

Let's regroup this work like this:

It turns out that the expression is multiplied by itself times, that is, according to the definition, this is the th power of the number:

In essence, this can be called “taking the indicator out of brackets.” But you can never do this in total: !

Let's remember the abbreviated multiplication formulas: how many times did we want to write? But this is not true, after all.

Power with a negative base.

Up to this point we have only discussed what it should be like index degrees. But what should be the basis? In powers of natural indicator the basis may be any number .

Indeed, we can multiply any numbers by each other, be they positive, negative, or even. Let's think about which signs ("" or "") will have degrees of positive and negative numbers?

For example, is the number positive or negative? A? ?

With the first one, everything is clear: no matter how many positive numbers we multiply by each other, the result will be positive.

But the negative ones are a little more interesting. We remember the simple rule from 6th grade: “minus for minus gives a plus.” That is, or. But if we multiply by (), we get - .

And so on ad infinitum: with each subsequent multiplication the sign will change. The following simple rules can be formulated:

1. even degree, - number positive.
2. Negative number raised to odd degree, - number negative.
3. A positive number to any degree is a positive number.
4. Zero to any power is equal to zero.

Determine for yourself what sign the following expressions will have:

1.	2.	3.
4.	5.	6.

Did you manage? Here are the answers:

1) ; 2) ; 3) ; 4) ; 5) ; 6) .

In the first four examples, I hope everything is clear? We simply look at the base and exponent and apply the appropriate rule.

In example 5) everything is also not as scary as it seems: after all, it doesn’t matter what the base is equal to - the degree is even, which means the result will always be positive. Well, except when the base is zero. The base is not equal, is it? Obviously not, since (because).

Example 6) is no longer so simple. Here you need to find out which is less: or? If we remember that, it becomes clear that, which means the base is less than zero. That is, we apply rule 2: the result will be negative.

And again we use the definition of degree:

Everything is as usual - we write down the definition of degrees and divide them by each other, divide them into pairs and get:

Before we look at the last rule, let's solve a few examples.

Calculate the expressions:

Solutions :

If we ignore the eighth power, what do we see here? Let's remember the 7th grade program. So, do you remember? This is the formula for abbreviated multiplication, namely the difference of squares!

We get:

Let's look carefully at the denominator. It looks a lot like one of the numerator factors, but what's wrong? The order of the terms is wrong. If they were reversed, rule 3 could apply. But how? It turns out that it’s very easy: the even degree of the denominator helps us here.

If you multiply it by, nothing changes, right? But now it turns out like this:

Magically the terms changed places. This “phenomenon” applies to any expression to an even degree: we can easily change the signs in parentheses. But it's important to remember: All signs change at the same time! You can’t replace it with by changing only one disadvantage we don’t like!

Let's go back to the example:

And again the formula:

So now the last rule:

How will we prove it? Of course, as usual: let’s expand on the concept of degree and simplify it:

Well, now let's open the brackets. How many letters are there in total? times by multipliers - what does this remind you of? This is nothing more than a definition of an operation multiplication: There were only multipliers there. That is, this, by definition, is a power of a number with an exponent:

Example:

Degree with irrational exponent

In addition to information about degrees for the average level, we will analyze the degree with an irrational exponent. All the rules and properties of degrees here are exactly the same as for a degree with a rational exponent, with the exception - after all, by definition, irrational numbers are numbers that cannot be represented as a fraction, where and are integers (that is, irrational numbers are all real numbers except rational numbers).

When studying degrees with natural, integer and rational exponents, each time we created a certain “image”, “analogy”, or description in more familiar terms. For example, a degree with a natural exponent is a number multiplied by itself several times; a number to the zero power is, as it were, a number multiplied by itself once, that is, they have not yet begun to multiply it, which means that the number itself has not even appeared yet - therefore the result is only a certain “blank number”, namely a number; a degree with an integer negative exponent - it’s as if some “reverse process” had occurred, that is, the number was not multiplied by itself, but divided.

It is extremely difficult to imagine a degree with an irrational exponent (just as it is difficult to imagine a 4-dimensional space). It is rather a purely mathematical object that mathematicians created to extend the concept of degree to the entire space of numbers.

By the way, in science a degree with a complex exponent is often used, that is, the exponent is not even a real number. But at school we don’t think about such difficulties; you will have the opportunity to comprehend these new concepts at the institute.

So what do we do if we see an irrational exponent? We are trying our best to get rid of it! :)

For example:

Decide for yourself:

1)

2)

3)

Answers:

1. Let's remember the difference of squares formula. Answer: .
2. We reduce the fractions to the same form: either both decimals or both ordinary ones. We get, for example: .
3. Nothing special, we use the usual properties of degrees:

SUMMARY OF THE SECTION AND BASIC FORMULAS

Degree called an expression of the form: , where:

Degree with an integer exponent

a degree whose exponent is a natural number (i.e., integer and positive).

Power with rational exponent

degree, the exponent of which is negative and fractional numbers.

Degree with irrational exponent

a degree whose exponent is an infinite decimal fraction or root.

Properties of degrees

Features of degrees.

• Negative number raised to even degree, - number positive.
• Negative number raised to odd degree, - number negative.
• A positive number to any degree is a positive number.
• Zero is equal to any power.
• Any number to the zero power is equal.

NOW YOU HAVE THE WORD...

How do you like the article? Write below in the comments whether you liked it or not.

Tell us about your experience using degree properties.

Perhaps you have questions. Or suggestions.

Write in the comments.

And good luck on your exams!

Among the various expressions that are considered in algebra, sums of monomials occupy an important place. Here are examples of such expressions:
\(5a^4 - 2a^3 + 0.3a^2 - 4.6a + 8\)
\(xy^3 - 5x^2y + 9x^3 - 7y^2 + 6x + 5y - 2\)

The sum of monomials is called a polynomial. The terms in a polynomial are called terms of the polynomial. Monomials are also classified as polynomials, considering a monomial to be a polynomial consisting of one member.

For example, a polynomial
\(8b^5 - 2b \cdot 7b^4 + 3b^2 - 8b + 0.25b \cdot (-12)b + 16 \)
can be simplified.

Let us represent all terms in the form of monomials of the standard form:
\(8b^5 - 2b \cdot 7b^4 + 3b^2 - 8b + 0.25b \cdot (-12)b + 16 = \)
\(= 8b^5 - 14b^5 + 3b^2 -8b -3b^2 + 16\)

Let us present similar terms in the resulting polynomial:
\(8b^5 -14b^5 +3b^2 -8b -3b^2 + 16 = -6b^5 -8b + 16 \)
The result is a polynomial, all terms of which are monomials of the standard form, and among them there are no similar ones. Such polynomials are called polynomials of standard form.

Behind degree of polynomial of a standard form take the highest of the powers of its members. Thus, the binomial \(12a^2b - 7b\) has the third degree, and the trinomial \(2b^2 -7b + 6\) has the second.

Typically, the terms of standard form polynomials containing one variable are arranged in descending order of exponents. For example:
\(5x - 18x^3 + 1 + x^5 = x^5 - 18x^3 + 5x + 1\)

The sum of several polynomials can be transformed (simplified) into a polynomial of standard form.

Sometimes the terms of a polynomial need to be divided into groups, enclosing each group in parentheses. Since enclosing parentheses is the inverse transformation of opening parentheses, it is easy to formulate rules for opening brackets:

If a “+” sign is placed before the brackets, then the terms enclosed in brackets are written with the same signs.

If a “-” sign is placed before the brackets, then the terms enclosed in the brackets are written with opposite signs.

Transformation (simplification) of the product of a monomial and a polynomial

Using the distributive property of multiplication, you can transform (simplify) the product of a monomial and a polynomial into a polynomial. For example:
\(9a^2b(7a^2 - 5ab - 4b^2) = \)
\(= 9a^2b \cdot 7a^2 + 9a^2b \cdot (-5ab) + 9a^2b \cdot (-4b^2) = \)
\(= 63a^4b - 45a^3b^2 - 36a^2b^3 \)

The product of a monomial and a polynomial is identically equal to the sum of the products of this monomial and each of the terms of the polynomial.

This result is usually formulated as a rule.

To multiply a monomial by a polynomial, you must multiply that monomial by each of the terms of the polynomial.

We have already used this rule several times to multiply by a sum.

Product of polynomials. Transformation (simplification) of the product of two polynomials

In general, the product of two polynomials is identically equal to the sum of the product of each term of one polynomial and each term of the other.

Usually the following rule is used.

To multiply a polynomial by a polynomial, you need to multiply each term of one polynomial by each term of the other and add the resulting products.

Abbreviated multiplication formulas. Sum squares, differences and difference of squares

You have to deal with some expressions in algebraic transformations more often than others. Perhaps the most common expressions are \((a + b)^2, \; (a - b)^2 \) and \(a^2 - b^2 \), i.e. the square of the sum, the square of the difference and difference of squares. You noticed that the names of these expressions seem to be incomplete, for example, \((a + b)^2 \) is, of course, not just the square of the sum, but the square of the sum of a and b. However, the square of the sum of a and b does not occur very often; as a rule, instead of the letters a and b, it contains various, sometimes quite complex, expressions.

The expressions \((a + b)^2, \; (a - b)^2 \) can be easily converted (simplified) into polynomials of the standard form; in fact, you have already encountered this task when multiplying polynomials:
\((a + b)^2 = (a + b)(a + b) = a^2 + ab + ba + b^2 = \)
\(= a^2 + 2ab + b^2 \)

It is useful to remember the resulting identities and apply them without intermediate calculations. Brief verbal formulations help this.

\((a + b)^2 = a^2 + b^2 + 2ab \) - the square of the sum is equal to the sum of the squares and the double product.

\((a - b)^2 = a^2 + b^2 - 2ab \) - the square of the difference is equal to the sum of squares without the doubled product.

\(a^2 - b^2 = (a - b)(a + b) \) - the difference of squares is equal to the product of the difference and the sum.

These three identities allow one to replace its left-hand parts with right-hand ones in transformations and vice versa - right-hand parts with left-hand ones. The most difficult thing is to see the corresponding expressions and understand how the variables a and b are replaced in them. Let's look at several examples of using abbreviated multiplication formulas.

We figured out what a power of a number actually is. Now we need to understand how to calculate it correctly, i.e. raise numbers to powers. In this material we will analyze the basic rules for calculating degrees in the case of integer, natural, fractional, rational and irrational exponents. All definitions will be illustrated with examples.

Yandex.RTB R-A-339285-1

The concept of exponentiation

Let's start by formulating basic definitions.

Definition 1

Exponentiation- this is the calculation of the value of the power of a certain number.

That is, the words “calculating the value of a power” and “raising to a power” mean the same thing. So, if the problem says “Raise the number 0, 5 to the fifth power,” this should be understood as “calculate the value of the power (0, 5) 5.

Now we present the basic rules that must be followed when making such calculations.

Let's remember what a power of a number with a natural exponent is. For a power with base a and exponent n, this will be the product of the nth number of factors, each of which is equal to a. This can be written like this:

To calculate the value of a degree, you need to perform a multiplication action, that is, multiply the bases of the degree the specified number of times. The very concept of a degree with a natural exponent is based on the ability to quickly multiply. Let's give examples.

Example 1

Condition: raise - 2 to the power 4.

Solution

Using the definition above, we write: (− 2) 4 = (− 2) · (− 2) · (− 2) · (− 2) . Next, we just need to follow these steps and get 16.

Let's take a more complicated example.

Example 2

Calculate the value 3 2 7 2

Solution

This entry can be rewritten as 3 2 7 · 3 2 7 . Previously, we looked at how to correctly multiply the mixed numbers mentioned in the condition.

Let's perform these steps and get the answer: 3 2 7 · 3 2 7 = 23 7 · 23 7 = 529 49 = 10 39 49

If the problem indicates the need to raise irrational numbers to a natural power, we will need to first round their bases to the digit that will allow us to obtain an answer of the required accuracy. Let's look at an example.

Example 3

Perform the square of π.

Solution

First, let's round it to hundredths. Then π 2 ≈ (3, 14) 2 = 9, 8596. If π ≈ 3. 14159, then we get a more accurate result: π 2 ≈ (3, 14159) 2 = 9, 8695877281.

Note that the need to calculate powers of irrational numbers arises relatively rarely in practice. We can then write the answer as the power (ln 6) 3 itself, or convert if possible: 5 7 = 125 5 .

Separately, it should be indicated what the first power of a number is. Here you can simply remember that any number raised to the first power will remain itself:

This is clear from the recording .

It does not depend on the basis of the degree.

Example 4

So, (− 9) 1 = − 9, and 7 3 raised to the first power will remain equal to 7 3.

For convenience, we will examine three cases separately: if the exponent is a positive integer, if it is zero and if it is a negative integer.

In the first case, this is the same as raising to a natural power: after all, positive integers belong to the set of natural numbers. We have already talked above about how to work with such degrees.

Now let's see how to correctly raise to the zero power. For a base other than zero, this calculation always outputs 1. We previously explained that the 0th power of a can be defined for any real number not equal to 0, and a 0 = 1.

Example 5

5 0 = 1 , (- 2 , 56) 0 = 1 2 3 0 = 1

0 0 - not defined.

We are left with only the case of a degree with an integer negative exponent. We have already discussed that such degrees can be written as a fraction 1 a z, where a is any number, and z is a negative integer. We see that the denominator of this fraction is nothing more than an ordinary power with a positive integer exponent, and we have already learned how to calculate it. Let's give examples of tasks.

Example 6

Raise 3 to the power - 2.

Solution

Using the definition above, we write: 2 - 3 = 1 2 3

Let's calculate the denominator of this fraction and get 8: 2 3 = 2 · 2 · 2 = 8.

Then the answer is: 2 - 3 = 1 2 3 = 1 8

Example 7

Raise 1.43 to the -2 power.

Solution

Let's reformulate: 1, 43 - 2 = 1 (1, 43) 2

We calculate the square in the denominator: 1.43·1.43. Decimals can be multiplied in this way:

As a result, we got (1, 43) - 2 = 1 (1, 43) 2 = 1 2, 0449. All we have to do is write this result in the form of an ordinary fraction, for which we need to multiply it by 10 thousand (see the material on converting fractions).

Answer: (1, 43) - 2 = 10000 20449

A special case is raising a number to the minus first power. The value of this degree is equal to the reciprocal of the original value of the base: a - 1 = 1 a 1 = 1 a.

Example 8

Example: 3 − 1 = 1 / 3

9 13 - 1 = 13 9 6 4 - 1 = 1 6 4 .

How to raise a number to a fractional power

To perform such an operation, we need to remember the basic definition of a degree with a fractional exponent: a m n = a m n for any positive a, integer m and natural n.

Definition 2

Thus, the calculation of a fractional power must be performed in two steps: raising to an integer power and finding the root of the nth power.

We have the equality a m n = a m n , which, taking into account the properties of the roots, is usually used to solve problems in the form a m n = a n m . This means that if we raise a number a to a fractional power m / n, then first we take the nth root of a, then we raise the result to a power with an integer exponent m.

Let's illustrate with an example.

Example 9

Calculate 8 - 2 3 .

Solution

Method 1: According to the basic definition, we can represent this as: 8 - 2 3 = 8 - 2 3

Now let's calculate the degree under the root and extract the third root from the result: 8 - 2 3 = 1 64 3 = 1 3 3 64 3 = 1 3 3 4 3 3 = 1 4

Method 2. Transform the basic equality: 8 - 2 3 = 8 - 2 3 = 8 3 - 2

After this, we extract the root 8 3 - 2 = 2 3 3 - 2 = 2 - 2 and square the result: 2 - 2 = 1 2 2 = 1 4

We see that the solutions are identical. You can use it any way you like.

There are cases when the degree has an indicator expressed as a mixed number or a decimal fraction. To simplify calculations, it is better to replace it with an ordinary fraction and calculate as indicated above.

Example 10

Raise 44, 89 to the power of 2, 5.

Solution

Let's transform the value of the indicator into an ordinary fraction - 44, 89 2, 5 = 49, 89 5 2.

Now we perform in order all the actions indicated above: 44, 89 5 2 = 44, 89 5 = 44, 89 5 = 4489 100 5 = 4489 100 5 = 67 2 10 2 5 = 67 10 5 = = 1350125107 100000 = 13 501, 25107

Answer: 13 501, 25107.

If the numerator and denominator of a fractional exponent contain large numbers, then calculating such exponents with rational exponents is a rather difficult job. It usually requires computer technology.

Let us separately dwell on powers with a zero base and a fractional exponent. An expression of the form 0 m n can be given the following meaning: if m n > 0, then 0 m n = 0 m n = 0; if m n< 0 нуль остается не определен. Таким образом, возведение нуля в дробную положительную степень приводит к нулю: 0 7 12 = 0 , 0 3 2 5 = 0 , 0 0 , 024 = 0 , а в целую отрицательную - значения не имеет: 0 - 4 3 .

How to raise a number to an irrational power

The need to calculate the value of a power whose exponent is an irrational number does not arise so often. In practice, the task is usually limited to calculating an approximate value (up to a certain number of decimal places). This is usually calculated on a computer due to the complexity of such calculations, so we will not dwell on this in detail, we will only indicate the main provisions.

If we need to calculate the value of a power a with an irrational exponent a, then we take the decimal approximation of the exponent and count from it. The result will be an approximate answer. The more accurate the decimal approximation is, the more accurate the answer. Let's show with an example:

Example 11

Calculate the approximate value of 21, 174367....

Solution

Let us limit ourselves to the decimal approximation a n = 1, 17. Let's carry out calculations using this number: 2 1, 17 ≈ 2, 250116. If we take, for example, the approximation a n = 1, 1743, then the answer will be a little more accurate: 2 1, 174367. . . ≈ 2 1, 1743 ≈ 2, 256833.

If you notice an error in the text, please highlight it and press Ctrl+Enter

Exponentiation is an operation closely related to multiplication; this operation is the result of repeatedly multiplying a number by itself. Let's represent it with the formula: a1 * a2 * … * an = an.

For example, a=2, n=3: 2 * 2 * 2=2^3 = 8 .

In general, exponentiation is often used in various formulas in mathematics and physics. This function has a more scientific purpose than the four main ones: Addition, Subtraction, Multiplication, Division.

Raising a number to a power

Raising a number to a power is not a complicated operation. It is related to multiplication in a similar way to the relationship between multiplication and addition. The notation an is a short notation of the nth number of numbers “a” multiplied by each other.

Consider exponentiation using the simplest examples, moving on to complex ones.

For example, 42. 42 = 4 * 4 = 16. Four squared (to the second power) equals sixteen. If you do not understand multiplication 4 * 4, then read our article about multiplication.

Let's look at another example: 5^3. 5^3 = 5 * 5 * 5 = 25 * 5 = 125 . Five cubed (to the third power) is equal to one hundred twenty-five.

Another example: 9^3. 9^3 = 9 * 9 * 9 = 81 * 9 = 729 . Nine cubed equals seven hundred twenty-nine.

Exponentiation formulas

To correctly raise to a power, you need to remember and know the formulas given below. There is nothing extra natural in this, the main thing is to understand the essence and then they will not only be remembered, but will also seem easy.

Raising a monomial to a power

What is a monomial? This is a product of numbers and variables in any quantity. For example, two is a monomial. And this article is precisely about raising such monomials to powers.

Using the formulas for exponentiation, it will not be difficult to calculate the exponentiation of a monomial.

For example, (3x^2y^3)^2= 3^2 * x^2 * 2 * y^(3 * 2) = 9x^4y^6; If you raise a monomial to a power, then each component of the monomial is raised to a power.

By raising a variable that already has a power to a power, the powers are multiplied. For example, (x^2)^3 = x^(2 * 3) = x^6 ;

Raising to a negative power

A negative power is the reciprocal of a number. What is the reciprocal number? The reciprocal of any number X is 1/X. That is, X-1=1/X. This is the essence of the negative degree.

Consider the example (3Y)^-3:

(3Y)^-3 = 1/(27Y^3).

Why is that? Since there is a minus in the degree, we simply transfer this expression to the denominator, and then raise it to the third power. Simple isn't it?

Raising to a fractional power

Let's start by looking at the issue with a specific example. 43/2. What does degree 3/2 mean? 3 – numerator, means raising a number (in this case 4) to a cube. The number 2 is the denominator; it is the extraction of the second root of a number (in this case, 4).

Then we get the square root of 43 = 2^3 = 8. Answer: 8.

So, the denominator of a fractional power can be either 3 or 4 and up to infinity any number, and this number determines the degree of the square root taken from a given number. Of course, the denominator cannot be zero.

Raising a root to a power

If the root is raised to a degree equal to the degree of the root itself, then the answer will be a radical expression. For example, (√x)2 = x. And so in any case, the degree of the root and the degree of raising the root are equal.

If (√x)^4. Then (√x)^4=x^2. To check the solution, we convert the expression into an expression with a fractional power. Since the root is square, the denominator is 2. And if the root is raised to the fourth power, then the numerator is 4. We get 4/2=2. Answer: x = 2.

In any case, the best option is to simply convert the expression into an expression with a fractional power. If the fraction does not cancel, then this is the answer, provided that the root of the given number is not isolated.

Raising a complex number to the power

What is a complex number? A complex number is an expression that has the formula a + b * i; a, b are real numbers. i is a number that, when squared, gives the number -1.

Let's look at an example. (2 + 3i)^2.

(2 + 3i)^2 = 22 +2 * 2 * 3i +(3i)^2 = 4+12i^-9=-5+12i.

Sign up for the course "Speed ​​up mental arithmetic, NOT mental arithmetic" to learn how to quickly and correctly add, subtract, multiply, divide, square numbers and even extract roots. In 30 days, you'll learn how to use easy tricks to simplify arithmetic operations. Each lesson contains new techniques, clear examples and useful tasks.

Exponentiation online

Using our calculator, you can calculate the raising of a number to a power:

Exponentiation 7th grade

Schoolchildren begin raising to a power only in the seventh grade.

Exponentiation is an operation closely related to multiplication; this operation is the result of repeatedly multiplying a number by itself. Let's represent it with the formula: a1 * a2 * … * an=an.

For example, a=2, n=3: 2 * 2 * 2 = 2^3 = 8.

Examples for solution:

Exponentiation presentation

Presentation on raising to powers, designed for seventh graders. The presentation may clarify some unclear points, but these points will probably not be cleared up thanks to our article.

Bottom line

We have looked at only the tip of the iceberg, to understand mathematics better - sign up for our course: Accelerating mental arithmetic - NOT mental arithmetic.

From the course you will not only learn dozens of techniques for simplified and quick multiplication, addition, multiplication, division, and calculating percentages, but you will also practice them in special tasks and educational games! Mental arithmetic also requires a lot of attention and concentration, which are actively trained when solving interesting problems.