Sometimes a luminous apple on the iPhone screen is on, it hangs and turns off, then the screen will be black, it does not respond to pressing. There are quite a few possible reasons for this problem. Today we will look at the most common problems in which the iPhone does not turn on and try to find a solution.
Reasons why the apple is on but the iPhone does not turn on
Before turning to the instructions, you need to understand what caused the iPhone not to turn on and the apple on the black screen to burn. The following reasons are listed:
1. Sometimes the battery is low, the phone is completely discharged, so the apple appears. Try connecting the charger and after waiting 20 minutes, try turning your iPhone back on.
2. The phone hangs when you turn it on, probably the “Power” button is broken. Occurs when disassembling an iPhone.
4. The charge controller is broken, there were power outages.
5. Problems with the power supply circuit of the device. The device lay on charge during a strong power surge.
6. Problems with the motherboard, while the phone itself can even sometimes boot up and even work for a while. True, the luminous apple on the iPhone screen will appear more and more often, until it stops running normally at all.
What to do if the iPhone does not turn on and the apple hangs
An easy way to solve the problem is to reboot the device using the Home and Power buttons, which must be held down for 10 seconds. If the reboot does not help, then the device will need to be updated or flashed. To do this, run on your own PC the iTunes program.
Step 1. Run iTunes on your computer and connect the USB cable (you do not need to connect the USB cable to your phone yet). Turn off the iPhone while holding the HOME + POWER buttons (on the iPhone 7, you need to hold HOME and - Volume)
Step 2. Hold down the HOME button and connect the USB cable to the device. Hold down the HOME button until the iTunes logo and plug image is displayed on the device screen.
Step 3. A notification will appear on the computer screen that the device is in recovery mode
Step 4. Now just click the Restore button... Be patient as Before restoring iPhone to factory settings, your computer will need to download the latest version of iOS from Apple's servers. In this case, the phone will lie with the screen off and show no signs of life. Even with good fast internet, the download process can take 40 minutes or more. If your Internet connection is unstable or slow, the process may never complete. Connect to a faster Wi-Fi connection.
DFU mode
If your iPhone won't turn on, even after trying the above, there is one more way left - restore iPhone in DFU (Device Firmware Update) mode. Follow the link and follow the step by step instructions.
There is an easier way to solve this problem, with the help of Tenorshare ReiBoot, one-click you can enter recovery mode and exit recovery mode. Signing in or out can help you solve "the apple is on fire but the iPhone won't start".
1. Download Tenorshare ReiBoot for Mac or Windows from the official website. Install it. Connect your iPhone on board to your computer (or Mac) using a USB cable.
2. Run the program. You will see several buttons, but only one will be active - "Enter Recovery Mode". Click on it and wait a while. You will see the iTunes logo on the display of your iPhone.
Useful software for iPhone/iPad is always in great demand among users and often ends up in the treasury of selected programs. Be sure to take note of the utility Tenorshare ReiBoot. It allows you to enter or exit iPhone recovery mode in the easiest and fastest way. And it will help when the standard system methods do not work.
Despite all the reliability of smartphones, failures and problems with their inclusion and stable operation are periodically possible. The correct operation of electronic components is important for device users, since when one chip or small microcircuit comes out, the phone stops working. Today we will analyze the problem that arises with the most reliable smartphones from Apple, when the iPhone does not turn on, the apple on the screen is constantly on.
Depending on the iPhone model, a white screen with an apple or a black background may appear on the screen, it depends on the color of the case. The background does not matter if the logo appears and iOs loading stops there, follow the instructions. But first, let's determine what happened to the phone.
It's all about the battery
The most common and simple reason when the apple burns and the screen goes blank on the iPhone. The person is sure that the phone is charged, and does not understand why it immediately turns off, begins to look for problems in other malfunctions. But everything is trite - the battery is out of order and you need to change it or try to calibrate it. Whether calibration will help is a moot point, it's worth a try, that's for sure.
To begin with, let's try to recharge the phone's battery again, but with the help of another charger, since the first one may simply be broken.
We remember that if the iPhone turns on only to the apple and immediately turns off, first of all we try to change the memory, and only then we proceed to other, more radical methods.
iOS system error
The second most common bug in a smartphone is a bug in the iPhone software. This difficulty arises if, on the eve of glitches, any program was installed, even from the official App Store, or even more so if a “Jailbreak” was made. There can be two solutions:
Doing a forced reboot
In 90% of cases, a hard reset will remove most of the glitches and crashes when the iphone 5 smartphone flashes an apple on the screen and does not turn on.
- We disconnect the iPhone from the computer or laptop, since iTunes can intervene during the reboot and put the device into UDF mode, now we don’t need it.
- We hold down two Home and Power buttons at the same time, wait 5-10 seconds, the phone should go into reboot.
After the reboot, the logotype will appear again for a while, and in a minute you will see the downloaded iOs, you can use the device in normal mode, and do not try to install the crooked application that caused such problems. If the above methods did not help, then you will have to reflash the device.
Reflash iPhone
It must be remembered that when flashing, all information is deleted, you will receive an absolutely clean phone, with factory settings. After that, everything can be restored, but provided that you have a saved backup in iTunes. In the absence of a backup copy, only an authorized service center will help you get information from a problematic gadget, but for a decent price. Therefore, at least once a week, make a backup if you have important information on your iPhone.
How to reflash an iPhone was discussed in the article. If you don’t want to waste time reading, I’ll leave a video instruction below on how to reflash the device, if the iPhone 5 does not turn on, the apple lights up and the screen goes blank after a while.
Checking the loops
Rarely enough, the cable of the screen or any other element inside the iPhone can pop out of the connector, as a result, the screen flickers on 5s, the apple lights up and the display goes out. It is treated simply, open the phone case, and flip all the connectors with loops.
The flickering of the screen should disappear, along with it the problem should go away when the apple is on the screen of the iphone 5, but does not turn on.
Chip burned out
Even if the flashing did not help, when the iphone 4s, 5, 5s, 6, 7 models flashes an apple on the screen and does not turn on, then the exact cause of the breakdown can only be told at the service center. Most likely, the chip on the motherboard of the smartphone burned out or went away, you can’t fix it yourself, you need expensive equipment.
In this case, can only list the factors why this could happen
- Dropping the iPhone into water, followed by a short circuit.
- The power controller went out of service after a strong voltage drop in the household network or using a non-original charger.
- Over time, the battery becomes unusable, after two or three years the battery should be changed in any case. Very rarely, the battery fails as a result of mechanical damage when dropped on a hard surface.
- The iPhone does not turn on when charging, the apple lights up and goes out, in this case, the damage may be hidden in the internal microcircuits. For example, the Flash memory chip has moved away from the board or disconnected as a result of a fall. The same thing can happen with any chips on the motherboard, be it NAND Flash or Nor Flash chips.
There are two ways out - to solder yourself, but if you are not friends with a soldering iron and do not have straight hands, it is better not to climb, you can just kill the iPhone, without the possibility of recovery. The best option is to take the phone to proven masters.
conclusions
As a result, keeping your iPhone in a case and avoiding drops on a hard surface will save you a lot of problems and save you a lot of money on repairs. But if this has already happened, follow the advice and carefully watch the video instructions
Video instruction
It is unpleasant to face a situation when the iPhone is stuck on an apple and does not turn on. There are a lot of reasons for this, starting with mechanical damage and ending with cold weather on the street. You should not panic ahead of time, because if the breakdown is not related to damaged internal parts that need to be replaced, then it is possible to fix the smartphone at home. For owners of "apple" products, a set of instructions has long been invented that are used as first aid for problems with a smartphone. If you don’t want to look for the cause of a phone malfunction, you should contact the master - breakdowns are diagnosed in a few minutes.
Causes of failure
To understand how to fix the device, it is important to figure out why the iPhone does not turn on, the apple burns and goes out. Main reasons:
- software failure;
- battery failure;
- incorrect update or firmware of the device;
- problems with the power button;
- discharged battery;
- damaged charging cable;
- corrosion of metal elements after being in water;
- mechanical damage.
It is worth immediately discarding the least possible options - if the phone did not fall and did not end up in water, then problems with damage to the internal filling can be safely excluded. Also check the power button - if the key sits tightly in the recess, does not stagger or fall out, then most likely it works without flaws. Check the integrity of the charging cable and connect your smartphone - the battery may be so discharged that there is only enough energy to display the logo.
Reboot
If the iPhone does not turn on, the apple is on and does not go out, restarting the device can help in this situation. Hold down the power button for a few seconds to enter the device into reboot mode. There is a second option to reboot the device - hard, on older models, for this, hold down the "Home" and "Power" buttons. In new models, the principle works differently:
- press the top volume key and quickly release;
- repeat the operation with the lower volume key;
- Press and hold the power button until the Apple logo appears on the screen.
The smartphone will go into forced reboot mode, which will not only bring the device back to life, but will also remove internal errors. A similar method is also used for problems with the network, battery, regular failures of the operating platform and other shortcomings.
iPhone in the cold
Often in the cold, the iPhone 5 does not turn on, the apple burns and goes out. This is due to the fact that Apple equipment is more afraid of severe Russian frosts than others. At low temperatures, a “disease” appears - a temporary loss of battery capacity. In order for the smartphone to work in normal mode, it will have to be returned to heat. Of course, you should not put the device on the battery, but room temperature is fine. Wait for the phone to warm up and turn it on. If the error persists after this, it is recommended to perform a hard forced reboot, as system errors occur due to frost and loss of capacity. Check the status of the smartphone - if the situation has not changed after several hours of charging and a hard reset, you will have to take the iPhone for diagnostics to a service center. Perhaps the problem lies in the hardware of the device.
Return to factory settings
If the forced reboot did not help, and the iPhone does not turn on, the apple does not light up, in this case, resetting the device to the factory settings can help. To do this, install the latest released version of iTunes on your computer, and then clearly follow the instructions:
- run the program on the computer;
- connect your smartphone using the USB cable that came with the kit;
- sometimes a password is required - enter in a special field;
- select the connected device from the list;
- select the "Overview" item;
- in the window that opens, click "Restore";
- confirm your choice.
After that, the phone will begin to restore the factory state, so after turning it on, you will have to re-enter information about the user, as well as passwords and accounts. During the process, in no case should you turn off the smartphone from the computer - this provokes the transformation of the iPhone into a "brick".
Firmware update
To help, if the iPhone 5S does not turn on, the apple is on and the smartphone goes out, the device firmware can be updated. To do this, also install the latest version of iTunes on your computer, and then follow the instructions:
- connect the cable to the computer and phone;
- open iTunes and select the device that needs to be updated;
- go to the menu item "Overview";
- select "Update";
- click on "Download and Update".
The program may require you to enter a password, you must provide this information. Wait for the process to complete, the smartphone and computer must not be turned off so as not to completely ruin the smartphone. If the firmware is installed with errors, the smartphone will have to be rolled back to the factory settings. Updating the firmware also helps to remove system errors, problems with the Internet and the network, as well as remove the “brakes” of the interface.
Battery problems
Often the main problem is battery failure. Batteries have a service life, after which the smartphone will not be able to get the right amount of power. The only way to solve the problem is to replace the battery. Check the charger socket and cable - they should be intact, without damage. It is not recommended to frequently discharge the smartphone to zero and use Chinese chargers - they damage the battery. The smartphone battery also needs care - once a month it is necessary to completely discharge and charge the device, do not connect the wires “directly”, otherwise the battery will swell. It is also possible to replace the battery yourself, but in such cases, the part should be ordered in official stores and service centers. Chinese counterparts are cheaper, but they serve only a few months.
Mechanical damage
If the iPhone does not turn on, the apple burns and does not go out, then the reason may lie deeper - under the smartphone case. In case of mechanical damage to internal parts, the phone freezes on the logo, and then either turns off or “pleases” with the logo until the charge runs out. It is difficult to fix such a flaw without the help of a professional, because:
- it is important to correctly diagnose the cause;
- you have to order expensive parts;
- work requires a specialized set of tools and jewelry precision.
If, when you turn on your Apple device, you see that the apple logo is on, but the iPad does not turn on, do not despair. Below are a number of ways to find out what the problem is and maybe even fix it yourself.
Why the ipad does not turn on: the apple is on and the screen goes blank
There are three groups of reasons why your iPad does not turn on and perhaps even the apple does not burn. Here are the reasons:
- Faulty charging cable or adapter.
- Software failures.
- Malfunction of device components.
Let's move on to a more detailed consideration of the reasons why the iPad is stuck on an apple and does not turn on.
The apple on the ipad is on and it does not turn on - check the state of charge
The reason, it would seem, is banal, but sometimes they don’t think that the tablet is empty. It often happens that the iPad does not turn on: the apple burns and goes out after a fraction of a second. It is possible that the remaining battery charge allowed the device to turn on for a very short time. Pay attention to the cable and charging adapter - if they are damaged. Try charging another similar device with them or change the outlet. If after these manipulations the tablet starts charging, then the defective accessory should be replaced or the socket repaired. Please note that only Apple-certified equipment should be used for charging.
Another option to fix problems with turning on the tablet is a very long battery charge. It can last for 1-2 days. According to user feedback, this should help.
The apple is on and the iPad does not turn on: software problems
Press the button on the ipad - the apple is on, then it does not turn on. This may be a sign that some kind of glitch has occurred in your tablet software. The first thing to try is to reboot the device. A deep reboot can be done by long pressing the power and home buttons. Hold until the apple logo appears. After a few seconds, your iPad is back to normal.
A universal way to fix a software error is to use the device recovery mode. Use iTunes to update or restore your tablet's firmware.
The iPad does not turn on, but the apple is on fire: what to do?
If your tablet display is dark but the Apple logo is on, you should connect your tablet to iTunes. The version of iTunes must be the most up-to-date. Then connect your tablet to your computer.
The recovery process is as follows.
- Turn off your iPad.
- On your computer, open iTunes (latest version).
- Connect your tablet to your computer with a cable.
- Press and hold the Home button until a message appears on the tablet screen “Connect to iTunes” or you can see that the program has found your device.
If, when connecting to a computer, the program displays any messages or warnings, follow the steps indicated on the screen to update or restore the iPad firmware. Steps through iTunes should help resolve the error in the software.
Please note that during the recovery process, you may lose all data from your device. The solution to the problem is possible by creating a copy of the data.
If the tablet is not visible when connecting to iTunes, then you should use the DFU mode. Follow the strict time limits allotted for working in this mode.
In the event that both recovery options cannot be implemented, you can use another computer with iTunes installed on it. Sometimes the reason that the device is not recognized through the computer is driver problems.
What to do if the iPad does not turn on and the apple is still on fire?
Another group of reasons are faulty components of the device. The battery, the power controller, the cable between the display and the motherboard, or the battery charging port could fail. All of these can be replaced. If all the recommendations above do not solve the problem, contact a specialist for diagnostics. An electronic technician can help determine what is not working and replace the correct part of the device.
Popular smartphones from Apple, whatever one may say, are the same computer, albeit a mobile one. And with him, like other representatives of this class of devices, troubles can happen - both hardware and software. One of the common reasons that can happen to them is when iPhone won't turn on but apple is on after pressing the power button.
In the people this unpleasant problem is called "white apple". In fact, this is a certain state of the iPhone, which is characterized by the display of the company logo on the screen (a bitten luminous apple) when you try to turn on the smartphone. In this case, further loading of the device does not continue. At the same time, he does not react to anything and, as usual, does not turn off. How to be?
The simplest thing you can try to do is Hard Reset (hard reboot). But, let's not rush and consider all the options in order.
So, what can be done to restore the phone's performance if the iPhone does not turn on, the apple is on fire ?!
The methods are:
Option 1. Hard Reset
We turn off the iPhone using the Hard Reset method, that is, the so-called "hard reboot". To do this, for 10 seconds, simultaneously hold down and hold down two buttons: Home and Power. Keep out until the device turns on.
Option 2: Reinstall iOS
If the first method did not help, you should try reinstalling the software on your iPhone. To do this, launch . This is done as follows - we connect the smartphone to the computer and launch the iTunes program. Next, hold down the Power and Home buttons. You have to hold it for about ten seconds. After this time, you need to release only the Power button. After that, iTunes should see the device (the screen will remain dark).
Well, then the program should offer to restore the device from a backup and reinstall iOS.
Then, after the device is restored, do a software update.
Option 3. Pick Cydia
This method is an alternative to the previous one if you do not want to restore the device or for some reason cannot do it while the iPhone does not turn on and off, but the luminous apple is on.
Here I will make a small lyrical digression. The fact is that very often the reason that the iPhone does not turn on is the installation of some third-party application that either got up incorrectly or does not work correctly. Then you should try to delete it and restart your smartphone. Another equally common reason is Cydia tweaks.
To restore the health of an iPhone that has an apple on the screen and does not disappear, let's try to load it without Cydia tweaks. To do this, turn off the device, press the volume up button - “+” and keep it pressed, wait until iOS loads without Cydia tweaks. If loading in this mode is successful, the reason is clearly in the last Tweak installed. Remove it and the device will be restored.
If it still does not boot, then reboot it again. Then after 5 minutes, try calling your iPhone.
If you can get through, great! This suggests that the phone boot is interrupted at the very last moment of OS startup. Then you need to try to access the file system through the iTools or iFunBox programs and use them to look for the files responsible for the failure.
Otherwise, whether you like it or not, but in order to remove the burning apple on the phone screen, you still have to reinstall the IOS using the method that I described earlier.
Note: This instruction is suitable not only for iPhone 4, 5 or 6 smartphones, but also for iPad tablets, because the same operating system is installed there and there, which means that an apple can burn on the iPad and it does not turn on and off .
Good luck and keep up the good work!
Loading...
